4 Wheel Parts Bronco Parts

In4low
Jul 01, 2021

Rank IV

Jul 01, 2021

Looks like their parts are now up on their site.

https://www.4wheelparts.com/parts-and-accessories/ford-bronco/_/N-1sks2#
I don't see the BYOD bar yet, but they have the fender flare delete kit - $350 for the 4 door.

https://www.4wheelparts.com/p/4-wheel-parts-bronco-fender-delete-kit-4-door-61768w/_/R-4WPBR-61768W
KJC76, Cliffhanger

Rank IV

Jul 19, 2021

#40
Gotcha. Mine is to be a daily driver that will go off road occasionally, mostly on the beach, so I dont want the 2" lift. Regarding the lift for the 33" tires, others who are expert in this have researched the appropriate (best practices) lift and type of lift required for different heights. 33" tires require a .67 lift, which is achievable with a spacer for moderate off-roading. The next durability step up would be a coilover shock that can be expanded to several lift heights. Ill try to attach the chart below.
The first chart by north7 gives the recommended lift from stock for different tires. The second chart shows the OEM lift of the various Bronco trims compared to each other.
Thanks for sharing. I’ll relay this to the installer. I want the min height possible so will go with 1.10 inches. Mine will 99% of time be daily driver as well.
OBX 4 Dr / Lux / Leather / Tow / Orange / Soft Top / 2.7L
Res: 7/15/20 - OD: 2/19/21 - IP: 6/23 - Built 6/27 - Rec 7/9

Rank III

Jul 27, 2021

#41
I ordered the 4WP side steps for the 4 dr. We installed the drivers side and the style just isn’t for me. They are really well built. Heavy duty and def be able to take a beating. I want a less heavy duty look. Anyway if anyone is interested let me know. I’m going to sell them for $750 firm. They go for $899 on the site plus shipping and tax. No damage, no scratches. Never left the driveway. Passenger side is still in the original wrapping. Sorry local only. Too heavy to ship/pack from my end. Located in Livermore, CA.

https://www.4wheelparts.com/p/4-wheel-parts-factory-bronco-side-steps-4-door-61668w/_/R-4WPBR-61668W

Attachments

KennyMac

Lakesinai

Jul 27, 2021

#42
I ordered the 4WP side steps for the 4 dr. We installed the drivers side and the style just isn’t for me. They are really well built. Heavy duty and def be able to take a beating. I want a less heavy duty look. Anyway if anyone is interested let me know. I’m going to sell them for $750 firm. They go for $899 on the site plus shipping and tax. No damage, no scratches. Never left the driveway. Passenger side is still in the original wrapping. Sorry local only. Too heavy to ship/pack from my end. Located in Livermore, CA.

https://www.4wheelparts.com/p/4-wheel-parts-factory-bronco-side-steps-4-door-61668w/_/R-4WPBR-61668W
Are they meant to also be rock sliders and support the weight of the vehicle? Or are these "just" heavy duty steps?
SC OBX 2021 2.7, High, 4dr, ARB Air, Rear Locker, 33" Tires, Beach Bronco, Skyrider

Rank III

Jul 27, 2021

#43
Yes according to their site they also act as rock rails.
Lakesinai

Rank III

Jul 28, 2021

#44
Here are some detail pics of the brackets and the step itself. As you can see its super heavy duty.
I copied this off the 4 Wheel Parts site. According to them they can be used as rock rails and having seen them in person I would concur. These babies are solid.
Q:In your video it appears this part is referenced as a rock slider. “Rock slider that will support the weight of the vehicle when you get that thing on its side and up into the rocks.” Is this the same part? Is it a step, rock slider, or by specs, both? Answer this question
A:This can essentially be used as both.
Answered by Kelly from 4WP Corporate Headquarters on 07/02/2021
@Lakesinai

Attachments

Ferreira703, TK1215

Lakesinai

Jul 28, 2021

#45
Here are some detail pics of the brackets and the step itself. As you can see its super heavy duty.
I copied this off the 4 Wheel Parts site. According to them they can be used as rock rails and having seen them in person I would concur. These babies are solid.
Q:In your video it appears this part is referenced as a rock slider. “Rock slider that will support the weight of the vehicle when you get that thing on its side and up into the rocks.” Is this the same part? Is it a step, rock slider, or by specs, both? Answer this question
A:This can essentially be used as both.
Answered by Kelly from 4WP Corporate Headquarters on 07/02/2021
@Lakesinai

Thanks for checking, for now, I'm satisfied with the stock steps on my OBX (when it arrives!). I'm a dune rider, not a rock crawler. They do look good on your Bronco, maybe you'll end up keeping them.
SC OBX 2021 2.7, High, 4dr, ARB Air, Rear Locker, 33" Tires, Beach Bronco, Skyrider
KennyMac, TK1215

Lakesinai

Jul 28, 2021

#46
I was originally going with 275/70R18's as well with no lift and am still on the fence while I have already ordered the 295's which are being delivered tomorrow. My neighbor highly recommended the 2 inch level lift kit for either set of tires so I figured since I was already raising it, I should opt for the bigger wheels. Hope I'm not disappointed. I also had to order the 4WP 3rd brake light lift assembly as the 295/70's won't fit with the stock brake light. The 275/70's should fit with the stock brake light. I'm also powder coating glossy black the stock OBX rims to match the front grill.
I didn't think that aluminum wheels could be successfully powdercoated! And if so, successfully function as wheels (bolt seating, air sealing). Post the pics!
SC OBX 2021 2.7, High, 4dr, ARB Air, Rear Locker, 33" Tires, Beach Bronco, Skyrider

Rank IV

Jul 29, 2021

#47
I didn't think that aluminum wheels could be successfully powdercoated! And if so, successfully function as wheels (bolt seating, air sealing). Post the pics!
The estimate to powder coat them was almost as much as new rims so I picked up some 18x9 Fuel rims which are being installed Tuesday of next week.
OBX 4 Dr / Lux / Leather / Tow / Orange / Soft Top / 2.7L
Res: 7/15/20 - OD: 2/19/21 - IP: 6/23 - Built 6/27 - Rec 7/9
Lakesinai, KennyMac

Rank III

Aug 06, 2021

#48
I want a roof rack that just clips onto the rear cap of the MIC cap, so the panels all come off, but theres a small cap rack over the back (4dr).
I cant draw, but you get the idea here
I‘m actually thinking of the same thing I found a picture online of the roof rack only on the back part over the cargo area.

Attachments

Lakesinai

Lakesinai

Aug 06, 2021

#49
I‘m actually thinking of the same thing I found a picture online of the roof rack only on the back part over the cargo area.
Perfect! Where did you find that? Would allow removing roof panels, open to sun, but some roof storage!
SC OBX 2021 2.7, High, 4dr, ARB Air, Rear Locker, 33" Tires, Beach Bronco, Skyrider

Lakesinai

Aug 06, 2021

#50
This was going to be a thing at some point. Not sure about where it's at now.
View attachment 15088
That looks like the (stronger, higher weight bearing capacity?) MOD roof on that OBX prototype, rather than the MIC roof. Perhaps we'll have to wait for the MOD roof in 2022-2023 for this rear-only roof rack system to be made!
SC OBX 2021 2.7, High, 4dr, ARB Air, Rear Locker, 33" Tires, Beach Bronco, Skyrider
Ferreira703

Rank V

Aug 06, 2021

#51
Wasn't 4WP suppose to make the Dash Rail for the Bronco? I didnt see it on their site.
* 2022 WILDTRAK
* 2022 Explorer ST

Rank III

Aug 06, 2021

#52
Perfect! Where did you find that? Would allow removing roof panels, open to sun, but some roof storage!
Ford Accessories, it’s a yakima rack I’m going to assume it’s the small roof rack since there’s no dimensions. I’m also looking for the cargo pull out tailgate which would be perfect with this rack, the Pull out tailgate would allow you to stand on it making it easy to load up the rack.

Attachments

Deano Bronc

Rank III

Aug 06, 2021

#53
Here are some detail pics of the brackets and the step itself. As you can see its super heavy duty.
I copied this off the 4 Wheel Parts site. According to them they can be used as rock rails and having seen them in person I would concur. These babies are solid.
Q:In your video it appears this part is referenced as a rock slider. “Rock slider that will support the weight of the vehicle when you get that thing on its side and up into the rocks.” Is this the same part? Is it a step, rock slider, or by specs, both? Answer this question
A:This can essentially be used as both.
Answered by Kelly from 4WP Corporate Headquarters on 07/02/2021
@Lakesinai
I was thinking about the 4WP or GoRhino step.

Rank V

Aug 06, 2021

#54
Wasn't 4WP suppose to make the Dash Rail for the Bronco? I didnt see it on their site.
Nobody seems to know what happened to that. But if you start around post #11 of the thread I linked, there's good info on the 1/4-20 mounting boss on the dash. So you can only mount what can be secured with 1 small bolt.

https://thebronconation.com/forums/...ask-the-folks-that-have-them.5546/#post-78599
7/14/20 Res, took delivery 4/7/22!!
A51 2 door Badlands, 2.7L, Sasquatch, Lux, MGV, MIC, Roof Rails, Tow
Deano Bronc

Rank 0

Oct 29, 2022

#55
Has anybody done a fender delete and then added splash or mudflaps? I Have a 4Dr Black Diamond with Sasquatch package and one of the first things I did was install a fender delete because I didn't like the look of the flares. I ordered RekGen mud flap, but am having issues getting them installed due to the rock rails. Has anybody else done this? Any tips, tricks, or suggestions would be appreciated.



Lakesinai

Oct 30, 2022

#56
The TrailRax half-rack works well for me on the MIC Top 4dr. I put the mid panel on it when I'm away from home.

Attachments

SC OBX 2021 2.7, High, 4dr, ARB Air, Rear Locker, 33" Tires, Beach Bronco, Skyrider
Deano Bronc

You must log in or register to post here.