Brian, thanks for another great post. I am curious if an AR with the stock collapsed would fit in the center row with both dividers removed?
Good News: A gentleman in the comments of the video stated that all the dividers are removable. The one's in the video simply pull out, and the others you can unbolt. I'd say it would fit just fine. 😀
I'll measure the inside of mine later today. But here's what I found for now.
Exterior Dimensions​
28.3" W x 39.3" L x 8.6" H​
Interior Compartment​
Over 5.5 cubic feet of storage space​
Thanks, @B MIller. If the interior dimensions isn’t too far off from the exterior measurements, methinks it’ll work. And if it does, next step will be finding the correct mounting solution.
Thanks, @B MIller. If the interior dimensions isn’t too far off from the exterior measurements, methinks it’ll work. And if it does, next step will be finding the correct mounting solution.
Ok, I went out and measured for you. It's 25.5 deep and 31.5 wide. May I suggest a foam insert instead of mounting??
Northwest Bronco Channel
TK1215
GS
Rank 0
gray squirrel
August 23, 2023
1
3
0
Member #
368627
Mar 08, 2024
#7
In regards to the space between the drawer and the side wall you can buy pool noodles or black pipe covers in a smaller diameter. 😎