Feb 13, 2022
I made a 4 tire inflator/deflator today. Will make airing down/up so much easier!!!
Started off with a 50’ roll of 1/4” Flexzilla air hose. I cut 10’ off of both ends of the hose so each 10’ section had a threaded black end. These are the 2 black ends in the brass 4 square in the center. I cut two 3’ pieces and cut the last piece into two 12’ pieces.
10’ hose from 4 square to brass T fitting, 3’ hose coming off the T, and the 12’ hose coming off the end and going to the air fitting. There is an air fitting on the end of every hose that will clip on to the valve stems. The air fittings are closed style.
All of these parts were purchased on Amazon.
Air hose
Pressure gauge
Shut off valve
Brass barbed T
Brass 4 way fitting
Brass barbed hose fittings
Air chucks - closed flow
M style plug
Hose ear clamps/pliers
Adapter
Make tank valve
Female M style coupler
Started off with a 50’ roll of 1/4” Flexzilla air hose. I cut 10’ off of both ends of the hose so each 10’ section had a threaded black end. These are the 2 black ends in the brass 4 square in the center. I cut two 3’ pieces and cut the last piece into two 12’ pieces.
10’ hose from 4 square to brass T fitting, 3’ hose coming off the T, and the 12’ hose coming off the end and going to the air fitting. There is an air fitting on the end of every hose that will clip on to the valve stems. The air fittings are closed style.
All of these parts were purchased on Amazon.
Air hose
Pressure gauge
Shut off valve
Brass barbed T
Brass 4 way fitting
Brass barbed hose fittings
Air chucks - closed flow
M style plug
Hose ear clamps/pliers
Adapter
Make tank valve
Female M style coupler
2021 Badlands, 4 door, 2.7L, Auto, LUX, SAS, Tow Package, MIC, Velocity Blue.
Wood J, kwerking