New 2025 Bronco Sport Badlands w/Sasquatch + Idaho BDR

PremierAdventures

Mar 09, 2025

Hello all! I am a new 2025 Bronco Sport Badlands Sasquatch owner. Well, I don't have the BS in physical possession yet, but it's ordered. 😍 I can't wait for the delivery and look forward to getting deep into the Idaho mountains to see what the BS is capable of. I've been eyeing the BS for many years now, and with the new interior and exterior updates, it was an easy purchasing decision. To get ahead of delivery, I'm trying to learn more about the BS through YT videos and BN Forums. I'm wondering if any BS owners are in Idaho who would like to connect and learn from each other. Additionally, I plan on taking my new BS on a few sections of the Idaho Backcountry Discovery Route this year, but not the whole route in the same year. If you are a BS owner and would be interested in driving the Idaho BDR, I would love to connect with you. Cheers! 🐴 ⛺

Hi, I'm Josh. I drive a 2025 Bronco Sport Badlands Sasquatch.

MTNMAN, Laura

Sort by date

Reaction Score

Nov 04, 2025

#40

Whpony96
Yea, Kendall located and hauled in our 2025 fully loaded BSBS (Bronco Sport Badlands Sasquatch) in Eruption Green from Oregon. Since ours litterly has less than 100mi on it so far I won't be Rock Crawling anytime soon. However trail runs are definately a go as long as there is zero chance of Idaho Pin-striping. I just gained access to F.B.I today and I see you on there as well.

Nice! I’ve had mine for about 4 months and nearing 10K miles. Just having too much with it. Lol. FBI is a great group for trail runs and they let you know if the run is safe for BS owners.

Hi, I'm Josh. I drive a 2025 Bronco Sport Badlands Sasquatch.

Whpony96, Unicorn

Nov 05, 2025

#41

Whpony96
Come on spill the beans, What ya got and how long have you had it?

23 Badlands, 1.5" lift, HRG skid plate, cat back performance exhaust, TrailRax roof rack with Pak rax, have but have not installed my new ditch lights yet, Completely blacked out with black lettering overlay, smoked black Ford emblem. replaced the antenna with a stuby so I can mount the roof top tent. Few other things.

Whpony96

Nov 05, 2025

#42

NoOneHereYet
23 Badlands, 1.5" lift, HRG skid plate, cat back performance exhaust, TrailRax roof rack with Pak rax, have but have not installed my new ditch lights yet, Completely blacked out with black lettering overlay, smoked black Ford emblem. replaced the antenna with a stuby so I can mount the roof top tent. Few other things.

Oh wow you have done a quite a bit haven't you. 😮

NoOneHereYet

Nov 05, 2025

#43

Whpony96
Oh wow you have done a quite a bit haven't you. 😮

You could say a little bit, wish we could fit 31" tires but maybe someday. Hopefully Ford opens their ears and starts making more performance and offroad upgrades for the BSBL

Deano Bronc, Unicorn

Nov 05, 2025

#44

NoOneHereYet
You could say a little bit, wish we could fit 31" tires but maybe someday. Hopefully Ford opens their ears and starts making more performance and offroad upgrades for the BSBL

Fitting 31" or larger tires on the BS will come with ALOT of other needed upgrades. For example: front and rear end re-gearing, axle shaft solutions (or portal axles) do to the heavy angle, extended upper and lower control arms in all 4 corners, taller springs and longer shocks and struts, a longer reardriveshaft. Once you start adding all those prices up you will realize you should of purchased a full size Bronco in the first place.

NoOneHereYet

Nov 06, 2025

#45

Whpony96
Fitting 31" or larger tires on the BS will come with ALOT of other needed upgrades. For example: front and rear end re-gearing, axle shaft solutions (or portal axles) do to the heavy angle, extended upper and lower control arms in all 4 corners, taller springs and longer shocks and struts, a longer reardriveshaft. Once you start adding all those prices up you will realize you should of purchased a full size Bronco in the first place.

The issue with 31's is really the wheel well, even if you remove the inner liner you still can't go bigger than a 245/65/17 basically 30" tire. Replacing things like control arms etc... to keep geometry good is not hard to fabricate. Cutting into the body to make a tire fit, that on the other hand is not all that easy. I mean if you lift it like i did 1.5" you have to change the control arms.

For example

TK1215, Unicorn

You must log in or register to post here.