What did you do to your Bronco today?

JAD67428

One of my sons put on my rear window flags.

This looks pretty cool.

Pimped out the TigerMoth with my 1st round of All Roads Taken badges.. I have 7 more that I need to purchase, then I'll just snag new ones as I visit new areas..

I did not / will not put dates on mine because there are several places I visited, in the late 80's - 90's, where I have no clue what year I actually went... LOL

Put it through the wringer. No worries, I have a buffer.

I did nothing but I did see that my Bronco and TigerMoth are on Google Street View...

Finally took the entire top off after 3 years of ownership.

Deano Bronc

Finally took the entire top off after 3 years of ownership.

There’s no rules!!!!’

🐎

First road trip with Njordr. Had most of the roof off. Had a really good day. Saw a friend I haven't seen in a few years, had some friendly rivalry jabs (he has a Wrangler). Talked about future trips and some overlanding ideas

Finished my security shelf for the cargo area. Just need to add an adjustable tie down rack to the top. Took it for a test drive and happy to report no rattles or squeaks.

Made a case to hold my tire deflators. $5 tire tools from auto zone work great. Got 4 of them. Had this old drill bit case and some foam from a box from something I bought.

First, I had new shoes installed, Falken R/T 01, 50k warranty…


Then, I had to remove the driver side RSE slider/step and replace the motor that was warrantied by RSE. Seems the motor assembly failed and was making a clicking noise and would not deploy/retract fully at times.



🐎🐎🐎

Chief Ron

First, I had new shoes installed, Falken R/T 01, 50k warranty…


Then, I had to remove the driver side RSE slider/step and replace the motor that was warrantied by RSE. Seems the motor assembly failed and was making a clicking noise and would not deploy/retract fully at times.



🐎🐎🐎

Yeah, I've replaced 1 motor so far less than a year later the same side wouldn't deploy. I figured it was the motor again so I replaced it plus the control box. Didn't fix it. Looked into it further and I couldn't get power to steps. I called them and they figured it was a bad wiring harness. They sent me the harness free but I do not look forward to replacing that harness. It's not the easiest of jobs.

Also, since I live in the rust belt, the bolts to drop the entire step were rusty so I ended up with some broken bolts plus a few broken welded nuts on the braces. Not too happy with the setup right now but when they are working, they make getting in the Bronco so much easier especially since I have a 2" lift.

Deano Bronc

Yeah, I've replaced 1 motor so far less than a year later the same side wouldn't deploy. I figured it was the motor again so I replaced it plus the control box. Didn't fix it. Looked into it further and I couldn't get power to steps. I called them and they figured it was a bad wiring harness. They sent me the harness free but I do not look forward to replacing that harness. It's not the easiest of jobs.

Also, since I live in the rust belt, the bolts to drop the entire step were rusty so I ended up with some broken bolts plus a few broken welded nuts on the braces. Not too happy with the setup right now but when they are working, they make getting in the Bronco so much easier especially since I have a 2" lift.

That sux…. That harness kicked my 🫏. I felt like i tried yoga at a soft pretzel stand owned by Mike Tyson when i finished. R/R the step wasn't too bad. I hope these steps don’t become an issue because I choose them mainly due to my limited mobility and the ease of entry and egress. Time will tell.

🐎

Added Turn Offroad's Overhead Molle Panels. Happy to say that with some adjusting I can use both the front panel AND my Meraki Hammock bracket.

Chief Ron

First, I had new shoes installed, Falken R/T 01, 50k warranty…


Then, I had to remove the driver side RSE slider/step and replace the motor that was warrantied by RSE. Seems the motor assembly failed and was making a clicking noise and would not deploy/retract fully at times.



🐎🐎🐎

While I dig my Wildpeak A/T4W's, I think I'll get the R/T's when these wear out. I dig the more aggressive look of the R/T's..

You can't tell but I added sooo many dead bugs. Went to a wedding last Friday, then decided to drive up the coast. In just over 3 years I passed 50k miles, fittingly near the Tillamook factory since my COM Bronco looks like a big block of cheddar. I'm not a big sasquatch fan myself but for those inclined Ace Hardware had some cool wood signs.

OrangecrushBronco

You can't tell but I added sooo many dead bugs. Went to a wedding last Friday, then decided to drive up the coast. In just over 3 years I passed 50k miles, fittingly near the Tillamook factory since my COM Bronco looks like a big block of cheddar. I'm not a big sasquatch fan myself but for those inclined Ace Hardware had some cool wood signs.

I need that 'Welcome Camp Sasquatch' sign so I can find a way to affix it inside my camper on the interior wall!!!!

Looks like you had a good time!

raqball

I need that 'Welcome Camp Sasquatch' sign so I can find a way to affix it inside my camper on the interior wall!!!!

Looks like you had a good time!

Wish I had known. I'll keep my eye out in my travels.

raqball

I did nothing but I did see that my Bronco and TigerMoth are on Google Street View...

Snow?! I'm guessing this isn't a current image?

OrangecrushBronco

Snow?! I'm guessing this isn't a current image?

Says on the photo it was taken March 2025..

Also, the RAM in the photo is now gone as it was traded last week for a 2025 Ford F150 SuperCab Lariat with the 3.5L PowerBoost engine.

I installed the external speaker for my Midland MXT275 radio on the roof MOLLE panel. It was fun running the cable from the speaker to the radio. I improvised by using a cat toy to guide the wire through the windshield frame, down the A-pillar, behind the grab handle and to the lower footwell. It worked like a charm. A few wire clips up top kept things nice and tidy.

I also installed my Tackform magnetic mic holder on the dash. 😎



I’ve got a new device rail on the way. Tackform really hooked me up at the recent Overland Expo PNW. Great products and great customer service!

My old Archetype Racing device rail is up for grabs. Anyone with a Badlands wanna buy it from me? I’ll even throw in a few 20mm and 1” balls. 🤓