What did you do to your Bronco today?

I installed the Redline hood lift struts today. They are a little tricky to install because of the fender bolt location on the Bronco. Fat fingers are not helpful here.! Others have posted pics so I won’t.! I will post pics of this neat little pic rail by Timbercreek from Opticsplanet.com. It almost matches the trim inside the Badlands.! Also got the pic rail cell phone mount by Caldwell to use with this 9 slot rail. The center hole needed enlarged slightly for the 1/4-20 Allen bolt used to attach it.

I installed my upr catch can today, definitely a little bit of challenge accessing the fittings but it's a good quality product. If anyone is planning on doing this it's an absolute must to remove the tire and the wheel well liner completely. There is no way you're going to get it installed without doing so. We'll see what kind of goo I can collect. This is the 2.3 kit.

Yesterday I did this! Weboost Drive Reach OTR - enjoy my video! Lol

Mounted my compressor with the @4x4TruckLEDs.com mounting bracket. Ran out of time and didn’t get it wired in.

I replaced the factory rock rails with a set of ZRoadZ rock rails. The install was almost easy. The front bolt hole on both sides didn’t line up with the hole on the bronco. All 6 flange weld bolts, the middle and rear bolt holes lined up perfectly. Ended up having to open up the front holes slightly with a car it dremel bit.

I think they look GREAT!

Finally wired up my LP9s on the roof today. First time building a harness from scratch!

I still didn't do anything since I don't have it yet. You guys and gals with your Broncos need to make some more YouTube videos. I think I went through them all.

I used my 20% KoH coupon code to get the Ford Performance (Rigid) ditch lights a couple weeks ago.

Got them installed today. Not too hard. But I did discover there are two Violet/Green wires under there.... or I'm color blind (which my wife accuses me of so... may be that)

Now that it's dark, I fired them up and yea, they help A LOT. Gonna need some fog/driving lights down low tho too.

** Update **

Upon further review, there is a Violet/Gray wire which is unpowered. That explains what I did wrong the first time. And my colorblind comment. (no offense intended to anyone who is really colorblind)

VT Bronco

I still didn't do anything since I don't have it yet. You guys and gals with your Broncos need to make some more YouTube videos. I think I went through them all.

All of them? ) we make 3 a week...

Added SAS flare to the Big Bend, enabled bambi mode and one other thing...

1Five1 Garage

Added SAS flare to the Big Bend, enabled bambi mode and one other thing...

View attachment 29358

Yay, it FINALLY showed up! Happy for all three of you!

1Five1 Garage

All of them? ) we make 3 a week...

Not all of yours yet but I'm getting there.

SlashRacer

Mounted my compressor with the @4x4TruckLEDs.com mounting bracket. Ran out of time and didn’t get it wired in. View attachment 29288

The purple wire - that’s gonna be the wire you’re looking for if you are connecting it to an auxiliary switch. That is what controls the solenoid at the compressor for power.

Also note, the compressor will auto stop when pressure is reached. Don’t do what I did and go “crap, I blew a fuse!” And be a dummy pulling that switches fuse!

1Five1 Garage

Added SAS flare to the Big Bend, enabled bambi mode and one other thing...

View attachment 29358

Congrats!! So happy it found it's way home!! Have you named it yet?

So when do we get a thread titled .....

"What are you going to do to your Bronco WHEN / if you finally get it " ? .

I've had these Bronco letters since ORACLE Lighting started shipping them out but started playing around with them this morning . I suppose I can modify my factory Ranger grill with them if I never get the Bronco and really confuse people :)




Oracle LED back lit letters.
https://www.oraclelights.com/products/oracle-lighting-universal-illuminated-led-letter-badges
Corso Motion 14ch Sequential controller
https://corsomotion.com/collections...le-14-channel-gnd-power-control-ver-1-10-each
Many variables you can change according to the dip switch settings and whether you activate via Park light , turn signal or brake circuit . Currently this is the default setting and using the park light circuit to activate . Flash pattern is 100% brightness then dims to 50% and stays on .

Man I can make my bronco look like Kitt from nightrider? That is pretty cool I like it

Brownco24

Man I can make my bronco look like Kitt from nightrider?

Only if you use red LEDS and put a '82 Trams Am body on it :)

Let’s try to keep this thread on track.

Well I raised my storage drawer to allow a folding table to go underneath. Made my own brackets. Very sturdy for moderate wheeling. Been raining so I haven't gotten to rear shock mount skid plates. Waiting on good lifts, auto stop/start eleminater, bartac Handel's and a bunch of stickers.

99'd my order to wait for the HOSS LOL