What did you do to your Bronco today?

DadChris44

Just latest pics, just had it ceramic coated. She look different in different light. Saturday RoxBlox mud flaps and the hydraulic hood hinges.
Lots of little things like the vinyl on my tailgate Ford logo to match all the Black and Blue motif. Gosh still kicking myself in the head for not ordering the rock rails. Will call the dealership and get an order put in for those as I already have the rock rail steps but no rock rails

radar3d

Where is the rail from?

Calgecko

Today, I installed the optional headlight switch with front and rear foglight buttons, and ran the front foglight wires to the innermost foglights I installed in the bumper, and got them activated through Forscan
here's the new switch, retaining all my puddle light and dimmer functionality, with buttons for front and rear fog lights.


Here's the front foglights activated with the foglight switch (small victory!)

Here's the remaining lights activated with the Aux3 switch:


also arrived in the mail today, all new speakers to replace the B&O speakers, as well as the Stinger sub and amp for the tailgate.. might get around to some of that this weekend.. we'll see how motivated I feel.

TK1215

Loving that headlight switch change out. Where did you pick it up at?

TK1215

Loving that headlight switch change out. Where did you pick it up at?

Calgecko

Thanks - got it from Tasca - there are various options depending on what your bronco does/doesn't have and whether you want both front/rear foglights or just front. there are some good links on the 'other' forum with part numbers and specifics

MobScene13

Technically it was during this past week, not today, but I finally got around to dropping the rear bumper to straighten the alignment and whole it was off I installed the hitch assembly. I picked one up from Snailfly on Amazon, because it was cheaper than the Curt product and it also had the wiring mount attached to it(not the actual wiring itself).
It's pretty beefy and well made, went on super easy.
Then I installed the Küat Pivot for my bike rack(today that goes on), so the whole thing can swing to the passenger side in order to access the tailgate. Pretty neat, and well made. The price tag definitely matches the quality.😁
Next up I installed the GoRhino RB20 sidesteps. I wanted these initially but shopped for a cheaper alternative and picked up the TAC sidesteps for $169. Great price and pretty nicely built, but once I had one side on, I felt they didn't extend out far enough to get good footing or protect very well from door dings. So back they went.
The RB20'S are pretty solid and they come out quite a bit, but ironically it's taking some time remembering that they're there! I keep forgetting to use them!
Go t a good price on Amazon, $480+tax and free shipping. I think $520 total. Substantial difference from their direct website. Included are some pics of the TAC's as well just in case anyone was considering them. The other thing I'll mention about them is that they have a plastic add-on where your foot lands, and I was nervous about how long they would hold up in the California heat. The sun destroys everything out here, haha. They might need replacing eventually.
Hope this helps somebody with their mid choices, I know there have been plenty of these product postings but it's good to have them in a recent thread, I think!
I'll try to post links too! Enjoy your builds!

Snailfly 2“ Trailer Tow Hitch Assembly Fit for Ford Bronco 2021 2022 2023 Class 3 Hitch Receiver, NOT for Bronco Sport https://a.co/d/e7cPXBt

Kuat Pivot 2-2" Swing Away Extension Bike Racks (Passenger Side) https://a.co/d/5cwIbEn

Kuat Racks NV 2.0 Bike Rack https://a.co/d/dKmitye

TAC 3” Texture Black Side Steps... https://www.amazon.com/dp/B09QS5P8HJ?ref=ppx_pop_mob_ap_share


Go Rhino! 69412973PC RB20 Running Boards - Complete Kit: RB20 Running Board + Brackets,Black https://a.co/d/77a7W8X

Soft Top Window Storage Bag compatible with Ford Bronco 2021 2022 with 4 Doors Plush Multi-Layer Protection Bags Prevent Soft Windows from Scratching and Bending. https://a.co/d/e9k3usC

Calgecko

Today - swapped out most of the speakers - the only ones left to do are the kick panel speakers. I tried to give the B&O speakers a fair shot, and considering that I'm deaf in one ear and partially deaf in the other - I'm no audiophile - but the stock speakers in the B&O system are legitimately NOT good. replaced the dash speakers with some JL Audio C1-400's, and some Focal audio speakers in the rear roll bar locations. Kick panel speakers will be done tomorrow (JL Audio C1-650X). Then went out for a drive up to the hills.

MobScene13

Great photos! The weather looks amazing there, I wish we had some down here😩

Calgecko

Went out for another drive today - up to Mormon Emigrant Trail (known as "MET" locally) - up in the Sierra's - about 6k feet altitude. Some recent snow had things nice and pretty, and a little muddy - PERFECT.

Broncy_OBX

Wow! those photos! What camera are you using? Those tree ones look like paintings. The Bronco makes it all look even more amazing.

Calgecko

Just finished installing the kick panel speakers... man, those were a PITA!!! So now the next thing to do is to install the Stinger tailgate mounted sub and amp, and disconnect that garbage B&O subwoofer .. that might take a week or two for me to find time to do though