Rear “squirter” not working

I think that I saw a schematic on B6G where it runs over on the passenger side behind the panels. I'll see if I can find the thread.

In the interim, can I just say I cracked up with "Rear squirter not working" combined with your handle is "3Dogs"... as a person with large dogs... I can safely say that if a dog's rear squirter isn't working right... there's all sorts of issues...

Irishdore

I think that I saw a schematic on B6G where it runs over on the passenger side behind the panels. I'll see if I can find the thread.

In the interim, can I just say I cracked up with "Rear squirter not working" combined with your handle is "3Dogs"... as a person with large dogs... I can safely say that if a dog's rear squirter isn't working right... there's all sorts of issues...

That’s hitting very close to home...
Our big dog had bowel resection surgery around Thanksgiving, and has been getting us up 2-3x per night ever since. It’s been a real challenge. We finally seem to have it under control, he’s slept through the last two nights.
So, yes - one squirter problem is more than enough!

I had to laugh at the title of this thread as well! 😂.
I had the same problem with the car I replaced with my Bronco. Never could figure it out. It has to be a disconnected, blocked, or kinked tube somewhere along the line. Let us know if you figure it out!

Mine had run dry and sat with the top off all summer. After reinstalling the top it took a good 10-15 seconds of constant on to purge through the line. Not sure if this helps.

Yes, it used to work.
I’ll try the unsnap / snap method tomorrow.

I fixed it.
I disconnected it at the roll bar, blew some air into the tube, and reconnected it.

At my age it doesn't squirt.
It leaks.