Bronco Nation

Picatinny Dash Mount

MIGeezer
Jun 12, 2023

Rank V

Jun 12, 2023

I know there are many threads. My primary use will be a GoPro. Will not have a phone on it. I'm looking for those that have purchased one and your pros and cons using it. I see some of them have more slots, like a molly rack, instead of a true picatinny rail. Also want one that I can install using the mount on the dash, not have to take the dash apart. Biggest question would you buy it again. Please list the mfg.

Thanks
Dave

Rank Benevolent Dictator

Jun 17, 2023

#20
Bluestreak57
Beautiful, but $350??? Not for me, given the limited use it will get…
It is indeed an expensive buy, but the old saying certainly applies, "you get what you pay for". I do use mine regularly to hold my radar detector and my phone. Whether I am 4x'ing or on pavement, these items stay where I place them.
Darrel, Bluestreak57

Built Mild

Jun 17, 2023

#21
With my Bronco, I spare no expense. After waiting 14 months for this puppy to arrive, I see every investment as a guaranteed return on investment. I also don't want to add any cheap crap to my expensive ride. LOL
Darrel

Don’t let the Hard Days Win! TEAM JEFF

Jun 17, 2023

#22
the poacher
It is indeed an expensive buy, but the old saying certainly applies, "you get what you pay for". I do use mine regularly to hold my radar detector and my phone. Whether I am 4x'ing or on pavement, these items stay where I place them.
I think most of us do not use them regularly and are looking for phone holder, and occasionally a GoPro holder, or a dash cam… In terms of “get what you pay for” that is true to a point, but mere mortals may not be able to swing them…

Would I like AR everything? Sure. I just can’t see the bang for the buck once you get over the “brand”

The cool factor is amazing, for sure.
BuckYeah, Darrel

Rank V

Jun 17, 2023

#23
BuckYeah
Until I get more devices, my BYOD rail literally means "Bring Your ONE Device." 😜

For the moment, I only need to mount my GoPro. The factory hookup, along with an accessory mount, does the trick.

IMG_1162.jpegIMG_1163.jpeg

This is my minimalist approach. I'm leaning towards the AR SLAP Rail or the AR TAP Rail. It will be a while before I need their AR BAM Rail. In case you hadn't noticed, I'm a huge Archetype Racing fan. Until I pull the trigger, my minimalist mount will have to do.
Thanks again for the good idea. Able to mount my camera for 61¢. I found a new case that allows you to run power while the camera is in the case. That was on Amazon, made by Sametop. It was a whopping $13.
Darrel, BuckYeah

Rank VI

Jun 17, 2023

#24
I've got an early AR with half picatinny, and half smooth. I love it.


the poacher, Deano Bronc

🐎Leader - Team Jeff 🐎

Jun 18, 2023

#25
Rydfree
Good , it should work out well for you .
I forgot to mention that the only thing I had to do was cut a pc of mounting tape to match and place on top of what was already on the bottom of the end pcs. My rail barely wanted to touch the dash at the end and it needed some better quality tape to stick well. I probably could have tweaked the rail slightly and made it touch better but I had the good tape handy and went that route.

I always keep some of this 3M grey tape with red liner around for the tough jobs. It is far stronger than the black tape most companies put on their products and what you will find at Home Depot etc.

Click to expand...
Thank you for all of your information! Greatly appreciated!
Rydfree

Rank Benevolent Dictator

Jun 19, 2023

#26
Bluestreak57
I think most of us do not use them regularly and are looking for phone holder, and occasionally a GoPro holder, or a dash cam… In terms of “get what you pay for” that is true to a point, but mere mortals may not be able to swing them…

Would I like AR everything? Sure. I just can’t see the bang for the buck once you get over the “brand”

The cool factor is amazing, for sure.
I do understand what you are saying. I am well aware of budgeting, especially when it comes to our Bronco's. So much that I want, but have to balance that with my needs.
Enjoy your truck and my it bring you much enjoyment!
Bluestreak57

you can tune a guitar but can't tune a fish

Jun 19, 2023

#27
ressig1
I've got an early AR with half picatinny, and half smooth. I love it.



Yeah if I get a Bronco is want to mount a red dot on rail.

Two Broncos

May 28, 2024

#28
EGBronco
I have the IAG dashboard rail. It’s only about 6in, however it’s not expensive and gets the job done. Very sturdy
https://iagoffroad.com/iag-i-line-picatinny-rail-with-phone-mount-for-2021-ford-bronco/

This is one that says it can NOT work with the Lux Package - B&O package.
I get that there is a speaker in the dashboard for the Lux Package, but the size seems to fit in the hole that would be "cup" if not the B&O package. Why won't this fit?
We rented a Bronco (turo) this last week that did not have the Lux Package....the size, thus rail , seemed the same???

Rank 0

May 29, 2024

#29
Roncos
This is one that says it can NOT work with the Lux Package - B&O package.
I get that there is a speaker in the dashboard for the Lux Package, but the size seems to fit in the hole that would be "cup" if not the B&O package. Why won't this fit?
We rented a Bronco (turo) this last week that did not have the Lux Package....the size, thus rail , seemed the same???

This video has one being installed on a bronco with Lux package ..no problem whatsoever

BuckYeah

Team Jeff!

Moderator

May 29, 2024

#30
Roncos
This is one that says it can NOT work with the Lux Package - B&O package.
I get that there is a speaker in the dashboard for the Lux Package, but the size seems to fit in the hole that would be "cup" if not the B&O package. Why won't this fit?
We rented a Bronco (turo) this last week that did not have the Lux Package....the size, thus rail , seemed the same???

I have the same mount although sold by another vendor. I didn't notice the stipulation that it wouldn't fit a LUX Bronco. Sure enough, it will not fit properly without modification. There is a slight difference in dashes although tough to see if they aren't side by side. That hump that the arrow is pointing to is a little different than the non-Lux Broncos. So the leg is made differently to fit that location. I ended up taking a Dremel to the leg to make it fit. Now it fits great.

Sorry for all the Moab dust. I still haven't had the chance to clean everything up. 😆

dash rail.jpg
Lots O Fords

Rank 0

May 30, 2024

#31
Deano Bronc
I have the same mount although sold by another vendor. I didn't notice the stipulation that it wouldn't fit a LUX Bronco. Sure enough, it will not fit properly without modification. There is a slight difference in dashes although tough to see if they aren't side by side. That hump that the arrow is pointing to is a little different than the non-Lux Broncos. So the leg is made differently to fit that location. I ended up taking a Dremel to the leg to make it fit. Now it fits great.

Sorry for all the Moab dust. I still haven't had the chance to clean everything up. 😆

dash rail.jpg

Ahhh…nice job on doing the mod. Yours Seems to be a shorter version of the rail ..where the other goes over the hump

🇨🇦 Never 51 🇨🇦

May 30, 2024

#32
I've been eyeing this one. I like the flush clean look
https://archetyperacing.com/products/ar-slap-bpm?variant=43267302916309
Bronco Buckeroo, Laura

Built Mild

May 30, 2024

#33
Bronco Buckeroo
This video has one being installed on a bronco with Lux package ..no problem whatsoever

Click to expand...

This is the BYODR I ended up with as well. It’s a sturdy and attractive piece. I’m looking forward to installing it once I get my Bronco back. For the record, it’s an “Ark-eh-tipe Racing” item made in nearby Silverdale, Washington. Mine is a smooth grey one with Badlands orange ends and center piece. Nice video, btw. Liked and subscribed. 😉
Chief Ron, Bronco Buckeroo

Rank 0

May 30, 2024

#34
BuckYeah
This is the BYODR I ended up with as well. It’s a sturdy and attractive piece. I’m looking forward to installing it once I get my Bronco back. For the record, it’s an “Ark-eh-tipe Racing” item made in nearby Silverdale, Washington. Mine is a smooth grey one with Badlands orange ends and center piece. Nice video, btw. Liked and subscribed. 😉

That’s a Sweet one

Rank II

May 31, 2024

#35
Turnoffroad has a double rail mounting system that's pricey, but it's burly. The one I saw did not screw into the dash on the ends. I would go without the screws as well. https://turnoffroad.com/collections/interior-accessories/products/2021-ford-bronco-dashboard-mount
Bronco Buckeroo

Built Mild

May 31, 2024

#36
EriktheCabonizedGray
Turnoffroad has a double rail mounting system that's pricey, but it's burly. The one I saw did not screw into the dash on the ends. I would go without the screws as well. https://turnoffroad.com/collections/interior-accessories/products/2021-ford-bronco-dashboard-mount

The Archetype Racing BYODR also doesn’t screw into the dash on the ends. It just uses the factory mounting point on the center of the dashboard.
Bronco Buckeroo

Rank 0

May 31, 2024

#37
EriktheCabonizedGray
Turnoffroad has a double rail mounting system that's pricey, but it's burly. The one I saw did not screw into the dash on the ends. I would go without the screws as well. https://turnoffroad.com/collections/interior-accessories/products/2021-ford-bronco-dashboard-mount

agreed, and neither screw in at the ends
BuckYeah

Rank II

Jun 01, 2024

#38
I have the Archetype Racing full rail (smooth) I use it for my Valentine 1 and a go pro.


Deano Bronc, Polaris425

Rank IV

Jun 04, 2024

#39
I just ordered the little bitty one from IAG, it was on sale for $14

Also, IAG is dang quick. Check out the times

Attachments

IMG_9462.jpeg 1170 x 1324 · 285.35 KB
Deano Bronc, Bluestreak57

You must log in or register to post here.