Being my bronco is used to go to OBX and fish for Redfish. Here is some custom decals.
Jakob1972, 615_Bronco
Last edited by a moderator:
Oct 20, 2023
Sort by date
Reaction Score
Rank 0
BEACHBRONCO
May 21, 2020
8
10
68
Member #
87327
Oct 20, 2023
#1
Love it my previous Jeep had Stingsilver on the hood. If you didn't fish you didn't know what it stood for.
Laura
OBX Hatman
jharrell3623
November 04, 2022
41
68
281
Member #
178956
Oct 20, 2023
#2
Great lure for sure , especially for those chomping ass Blues...........
Moderator
Staff member
Administrator
Laura
March 18, 2021
4994
14993
4617
Member #
1976
Oct 24, 2023
#3
Nicely applied! Care to share who you used to create them?
2021 Oxford White 2-door non-Sas Mid package 2.7L/10-speed Badlands with MIC top
2021 Carbonized Gray 2-door Sas High package 2.7L/10-speed Badlands with MIC top
Keeping the Jeeps: stock '89 XJ and 3.5" lifted '00 XJ on 31s
Thanks for the referral. Just bought a label on Lettering.com. Appreciated
No problem , if you are using that same location. I will say this , it's a concave surface , so you want to peel back along the bottom all the way the entire length of the sticker about a half inch and then fold the paper back and press flat. DO NOT cut it off. The tiny paper fibers will stick to you decal as you cut and you will see it behind the sticker. Clean surface with alcohol. Then carefully pull the sticker taught and lightly line it up. Just barely tap in a few spots. Stand back and look. If it looks right , then go along the bottom edge and slowly stick the entire exposed part. Then fold the top down , remove the paper backing. And work the length back and forth slowly into the curvature till completely applied. Heat lightly with a heat gun. Wait about 30 seconds and then carefully squeegee it. It's an awequard space for sure. I used blue painters tape at the top edge to check alightment before commiting.