Rear Spoiler?

Pictures……

More pics….
Attaches with 3M tape.

I'm not feeling it, but never really cared for those on most cars/trucks.
If you like it, get it, your Bronco, do what you like too it.

That will be one NO. Keep feedback coming.
Appreciate it.👍😎

Some of these things actually have function they direct air down the back window it helps keep dust and rain off the window. Is that what this is supposed to do? If it is for looks and you like it then go for it.

I would be worried that the 3M adhesive tape may compromise the MIC top. Its outer shell is very thin.

Unless you meant to say you were considering this for your Mustang (which you did not),that'd be a big No from me.

But as mentioned already, it's your Bronco, you do you.

It is made by Red Rock. Here are some details……

Aggressive, Aerodynamic Styling. An excellent way to enhance the stylish good looks of your 2021-2024 Ford Bronco is with a gloss black RedRock Rear Roof Spoiler. Featuring a notched cut out design, this RedRock Rear Roof Spoiler will give your F-Bronco an aggressive street appearance.
Quality Construction. Manufactured from blow molded acrylonitrile butadiene styrene (ABS) plastic, this Rear Roof Spoiler was designed using the original OEM CAD data to ensure a perfect fit. ABS is an extremely strong material known for its light-weight, superior durability and impact resistance - making it perfect to withstand the hazards of daily driven vehicles. RedRock then completes their Spoiler in a gloss black finish.
Simple, Peel and Stick Installation. No messy body work or drilling is required as this RedRock Rear Spoiler is designed to install with the supplied 3M doubled sided automotive bonding tape. Thoroughly clean the surface, then simply peel the 3M tape from the back of the Spoiler and set firmly in place. Installation can normally be completed in under 30 minutes, however you should wait at least 24 hours for the bonding tape to fully cure before driving.
Application. This RedRock Rear Spoiler; Gloss Black is designed to fit 2021-2024 Ford Bronco models equipped with a factory Hard Top.Application Note. Bronco's with an aftermarket roof rack installed may require trimming or modifications to said roof rack for clearance.
Fitment:

• 2021 Ford Bronco
• 2022 Ford Bronco
• 2023 Ford Bronco
• 2024 Ford Bronco

RedRock FB28516
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Broncley

It is made by Red Rock. Here are some details……

Aggressive, Aerodynamic Styling. An excellent way to enhance the stylish good looks of your 2021-2024 Ford Bronco is with a gloss black RedRock Rear Roof Spoiler. Featuring a notched cut out design, this RedRock Rear Roof Spoiler will give your F-Bronco an aggressive street appearance.
Quality Construction. Manufactured from blow molded acrylonitrile butadiene styrene (ABS) plastic, this Rear Roof Spoiler was designed using the original OEM CAD data to ensure a perfect fit. ABS is an extremely strong material known for its light-weight, superior durability and impact resistance - making it perfect to withstand the hazards of daily driven vehicles. RedRock then completes their Spoiler in a gloss black finish.
Simple, Peel and Stick Installation. No messy body work or drilling is required as this RedRock Rear Spoiler is designed to install with the supplied 3M doubled sided automotive bonding tape. Thoroughly clean the surface, then simply peel the 3M tape from the back of the Spoiler and set firmly in place. Installation can normally be completed in under 30 minutes, however you should wait at least 24 hours for the bonding tape to fully cure before driving.
Application. This RedRock Rear Spoiler; Gloss Black is designed to fit 2021-2024 Ford Bronco models equipped with a factory Hard Top.Application Note. Bronco's with an aftermarket roof rack installed may require trimming or modifications to said roof rack for clearance.
Fitment:

• 2021 Ford Bronco
• 2022 Ford Bronco
• 2023 Ford Bronco
• 2024 Ford Bronco

RedRock FB28516
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

A few things stick out to me besides just the style of it, it only comes in gloss black which I would think would look a little off since the hard top is a Matte Gray color. Also, I would never trust it sitting up there with only 3M tape is used for attachment.

As has been mentioned, if it was to assist in keeping dust/dirt/rain off of the rear window by channeling air down, I think it is product worth considering. However, the gloss black, outside of working with the gloss black body paint, will not look good with other body paint colours due to it not matching the grey MIC top. For that reason, I would not purchase.

The gloss black will go with my black base Just like the one in the pictures. As for 3M tape my OEM Ford hood scoop and side door protectors are held on the same way.
Really comes down to the look. I like it but as I said am only at the contemplation stage. I do appreciate everyone’s feed back. Keep it coming.

the poacher

As has been mentioned, if it was to assist in keeping dust/dirt/rain off of the rear window by channeling air down, I think it is product worth considering. However, the gloss black, outside of working with the gloss black body paint, will not look good with other body paint colours due to it not matching the grey MIC top. For that reason, I would not purchase.

Back in the ‘80’s when I bought my Bronco II a rear wiper was optional. If you opted not to get the wiper, a rear spoiler similar to this was standard. So yes, confirming the statement regarding cleanliness of rear window.

Sam I Am 1966

Back in the ‘80’s when I bought my Bronco II a rear wiper was optional. If you opted not to get the wiper, a rear spoiler similar to this was standard. So yes, confirming the statement regarding cleanliness of rear window.

Now that makes this more interesting. Besides the look if it actually has a purpose then I am starting to want!!!!!!😎

+10 HP, right?

Absurd, ridiculous and useless, but I'm in.

Bschurr

+10 HP, right?

Yes and downforce on our bricks. Now are they strong enough for mounting recover boards?....

Bschurr

+10 HP, right?

+25 HP as my Bronco is 2 door🤣

I think it takes away from the Bronco and looks cheap. I’m more of a minimalist, less is more kinda thing A black bronco stands out by itself. As others have pointed out, it’s yours, make it yours. I’ve added some mods, and did it for me. Not concerned if anyone else likes them. That’s why we’re going to see a ton of different Bronco’s at super cel.

For me it would be a no, but with that being said it's your Bronco, do what ever makes you happy.