[Gen 5] Let's See Your Bronco!

BrokeBroncoGuy94

Finally got a picture up with the top on and the new plates :)


Top Off

Wish my state had Smokey plates. As it is 3 DOL offices in my state have told me it's likely an 18 month wait to get a personalized state parks plate due to one of their machines being down and oddly enough too few inmates (I guess they still do that) due to letting people out during covid.

Benjamin74

Goonwagon, 1994 Prerunner Bronco. 19" Wheel travel all the way around. Driveway built.

I don't tend to be a fan of wide body treatments but this looks right. Well done.

Bronc96

My 96 EB with 5.0 and E4OD. She doesn't get out as much as she used to but still runs like new!

I HAD ONE EXACTLY LIKE THIS EXCEPT IT HAD THE 351. Great truck but wifey didn't like it so much...... if she had only known back then but now its been replaced with a 22... i got the last laugh

1996 XLT with 213k miles on it. Bought it from the daughter of the original purchaser. Spent a year going through the entire chassis (bearings, bushings, seals, springs, shocks), interior (carpet, headliner, stereo, door & window seals) and engine (cooling system, heating system, AC, gaskets). Raptor Liner for the top (plus all new seals). It's got fresh rear springs and RC leveling springs in the front with 33s. Father / Son project and is now my 17yo's daily. Currently looking at dropping a 408ci motor in as well as starting on some bodywork (small rust on the top of the rear fenders + a new blister on the driver front fender). We've been running it on the trails in CO for the last two years.

jscheier

1996 XLT with 213k miles on it. Bought it from the daughter of the original purchaser. Spent a year going through the entire chassis (bearings, bushings, seals, springs, shocks), interior (carpet, headliner, stereo, door & window seals) and engine (cooling system, heating system, AC, gaskets). Raptor Liner for the top (plus all new seals). It's got fresh rear springs and RC leveling springs in the front with 33s. Father / Son project and is now my 17yo's daily. Currently looking at dropping a 408ci motor in as well as starting on some bodywork (small rust on the top of the rear fenders + a new blister on the driver front fender). We've been running it on the trails in CO for the last two years.

Looks great! There has not been a single bad Gen in the Bronco lineage.

medic2586

I HAD ONE EXACTLY LIKE THIS EXCEPT IT HAD THE 351. Great truck but wifey didn't like it so much...... if she had only known back then but now its been replaced with a 22... i got the last laugh

Love these EBs! Never owned one but came close a couple times.

jscheier

1996 XLT with 213k miles on it. Bought it from the daughter of the original purchaser. Spent a year going through the entire chassis (bearings, bushings, seals, springs, shocks), interior (carpet, headliner, stereo, door & window seals) and engine (cooling system, heating system, AC, gaskets). Raptor Liner for the top (plus all new seals). It's got fresh rear springs and RC leveling springs in the front with 33s. Father / Son project and is now my 17yo's daily. Currently looking at dropping a 408ci motor in as well as starting on some bodywork (small rust on the top of the rear fenders + a new blister on the driver front fender). We've been running it on the trails in CO for the last two years.

Welcome to Bronco Nation John! I wondered if you would ever get over here.
Beautiful Bronco BTW.

Hello all, new here. Heres my 96 XLT 5.8 a bought it to restore fully hashing out the little stuff at this point. I dont know why after the third try and rotating that it wont just post straight up and down.

Mavgrab302

Hello all, new here. Heres my 96 XLT 5.8 a bought it to restore fully hashing out the little stuff at this point. I dont know why after the third try and rotating that it wont just post straight up and down.

Welcome. Great looking rig!

First time I saw this post. My 93 that I bought new and it was the first vehicle I ever bought new. Did the custom paint immediately and as part of the purchase. The 33's came day 2. At the time I whited out the grill, I had the only one. The paint reflected a diving theme, and it has "Diver's Edition" written just above the divers flag on the rear fenders. Been to 10 states, on the beach, hauled scuba gear, wheeled around Arizona, and lots of camping (now called overlanding).
I always repaired or fixed anything as soon as it broke so it's in very good condition. I have more pictures only they are actual photos. They didn't have digital when she was new.
The 351 (5.8) was rebuilt at 300,000 miles with some Edelbrock heads, cam, intake and roller rockers. In retrospect, I should have rebuilt it stock. has 340,000 on it now.

Lots O Fords

First time I saw this post. My 93 that I bought new and it was the first vehicle I ever bought new. Did the custom paint immediately and as part of the purchase. The 33's came day 2. At the time I whited out the grill, I had the only one. The paint reflected a diving theme, and it has "Diver's Edition" written just above the divers flag on the rear fenders. Been to 10 states, on the beach, hauled scuba gear, wheeled around Arizona, and lots of camping (now called overlanding).
I always repaired or fixed anything as soon as it broke so it's in very good condition. I have more pictures only they are actual photos. They didn't have digital when she was new.
The 351 (5.8) was rebuilt at 300,000 miles with some Edelbrock heads, cam, intake and roller rockers. In retrospect, I should have rebuilt it stock. has 340,000 on it now.

She's a beaut.

Mavgrab302

Hello all, new here. Heres my 96 XLT 5.8 a bought it to restore fully hashing out the little stuff at this point. I dont know why after the third try and rotating that it wont just post straight up and down.

I have found that if you edit the photo in whatever phone app you use and resave it, it will then post in the correct orientation. I have no idea why, but it works!

OrangecrushBronco

Welcome. Great looking rig!

appreciate it, just wish the picture would act rightt...lol

TorgSurv

I have found that if you edit the photo in whatever phone app you use and resave it, it will then post in the correct orientation. I have no idea why, but it works!

Ill try that but it opens correct on PC and in iphone photos just not here so not sure what that is about.

Brought home this 92 nite the other day, 302 5 spd.

Akfordfan

Brought home this 92 nite the other day, 302 5 spd.

It truly is a shame they never made a Lightning Bronco. This reminds me of my Uncle's 1st Gen Lightning.

Akfordfan

Brought home this 92 nite the other day, 302 5 spd.

I keep hoping someone will make these for the 6g Broncos. Some say light bars or deflectors with LED strips are the same but I respectfully disagree.

OrangecrushBronco

It truly is a shame they never made a Lightning Bronco. This reminds me of my Uncle's 1st Gen Lightning.

I've seen a couple articles saying the nite package was the lightning before the lighting. I think this would look pretty cool with some blacked out lightning wheels on it

Akfordfan

I've seen a couple articles saying the nite package was the lightning before the lighting. I think this would look pretty cool with some blacked out lightning wheels on it

Those 1st Gen lightning wheels were so sweet especially for oem wheels. This Bronco would look amazing with all the Lightning trimmings.