Window not open/close on entry

I had to reprogram mine. I think you go down, hold for 5 seconds, up for 5 then back down for 5.

Resetting One-Touch Close from Bronco manual
Carry out all steps within 30 seconds of starting the sequence.
Close the window.
Press and hold the window control switch until the window is fully open. Keep the window control switch pressed for two seconds.
Lift and hold the window control switch until the window is fully closed. Keep the window control switch held for two seconds.
Press and hold the window control switch until the window is fully open. Keep the window control switch pressed for a two seconds.
Lift and hold the window control switch until the window is fully closed. Keep the window control switch held for a two seconds.
Note: Repeat the procedure if the window does not close when you use one-touch.
Use the switch and hold it while lowering the window and KEEP holding it for 5 seconds after window has opened. Repeat the same procedure for closing it, making sure to hold it up for 5 seconds.
Lower window, hold window switch five seconds. Raise window, hold window switch five seconds. Repeat two times. Roll window back up. Exit vehicle normally. :cool:

Wow, can you complete all those steps in 30 seconds? I didn't add up all the hold for two seconds, hold for five, but it's gotta be close.

ScottMc

Found and bought a 2-Dr Antimatter Blue OBX Bronco on Friday (yes I got hit with an ADM). Got it home (225 Miles away) and have discovered the passenger window is not dropping down upon opening the door. Does anyone know how to fix? I saw one youtube video saying to turn the vehicle on press and hold down the window down for 5 seconds and then the up for 5 seconds and that should fix it, but doesn't work for me. I am able to open it with the console button, but auto-function is not working. Figured I would ask before sitting at my local dealership. Thanks!

Yes Happened to mine. I tried the button trick too, it didn't work. Took it to the dealer, it took 20 minutes to fix. They had to reboot or reflash or whatever they call it the computer. She told me it happens sometimes when the computer does an update, it looses the program. Someone said on my youtube post on it that it has happened with the mustangs for awhile.

It happened on my back passenger window few months ago. Re-set it myself. Works fine now. I rolled down the problem window only. Let off. Then press and hold down on same window button for 5-10 seconds. Then same steps for rolling up. If that doesn't work. Try same sequence but do it 2 times (down, up, down, up). If needed try not letting off the window button in between long presses.

10K_Vet

Resetting One-Touch Close from Bronco manual
Carry out all steps within 30 seconds of starting the sequence.
Close the window.
Press and hold the window control switch until the window is fully open. Keep the window control switch pressed for two seconds.
Lift and hold the window control switch until the window is fully closed. Keep the window control switch held for two seconds.
Press and hold the window control switch until the window is fully open. Keep the window control switch pressed for a two seconds.
Lift and hold the window control switch until the window is fully closed. Keep the window control switch held for a two seconds.
Note: Repeat the procedure if the window does not close when you use one-touch.
Use the switch and hold it while lowering the window and KEEP holding it for 5 seconds after window has opened. Repeat the same procedure for closing it, making sure to hold it up for 5 seconds.
Lower window, hold window switch five seconds. Raise window, hold window switch five seconds. Repeat two times. Roll window back up. Exit vehicle normally. :cool:

THANK YOU!!! I did the following as directed and I am back in business...
Press and hold the window control switch until the window is fully open. Keep the window control switch pressed for two seconds.
Lift and hold the window control switch until the window is fully closed. Keep the window control switch held for two seconds.
Press and hold the window control switch until the window is fully open. Keep the window control switch pressed for a two seconds.
Lift and hold the window control switch until the window is fully closed. Keep the window control switch held for a two seconds.
Note: Repeat the procedure if the window does not close when you use one-touch.

Calling to cancel my Service appointment...

I had the same issue on the right rear door. Scheduled an appointment that was approximately one month away. Found the Youtube video and completed the steps. It fixed the problem but every once in a while I have to complete the steps again. I can’t duplicate what causes the issue to begin with?? Anyone have an idea?

ScottMc

THANK YOU!!! I did the following as directed and I am back in business...
Press and hold the window control switch until the window is fully open. Keep the window control switch pressed for two seconds.
Lift and hold the window control switch until the window is fully closed. Keep the window control switch held for two seconds.
Press and hold the window control switch until the window is fully open. Keep the window control switch pressed for a two seconds.
Lift and hold the window control switch until the window is fully closed. Keep the window control switch held for a two seconds.
Note: Repeat the procedure if the window does not close when you use one-touch.

Calling to cancel my Service appointment...

Glad I can help. Now go have some fun. (y)

ScottMc

THANK YOU!!! I did the following as directed and I am back in business...
Press and hold the window control switch until the window is fully open. Keep the window control switch pressed for two seconds.
Lift and hold the window control switch until the window is fully closed. Keep the window control switch held for two seconds.
Press and hold the window control switch until the window is fully open. Keep the window control switch pressed for a two seconds.
Lift and hold the window control switch until the window is fully closed. Keep the window control switch held for a two seconds.
Note: Repeat the procedure if the window does not close when you use one-touch.

Calling to cancel my Service appointment...

This worked excellent for me and my driver front window. Thank you!

The auto function quit working on my driver window. Dealer replaced The master switch. Worked for a week then quit. Dealer did a reset and it worked for a couple weeks. Now they say to replace switch again, so of course waiting on switch to come in.

banter83

The auto function quit working on my driver window. Dealer replaced The master switch. Worked for a week then quit. Dealer did a reset and it worked for a couple weeks. Now they say to replace switch again, so of course waiting on switch to come in.

Hi there, I'd be happy to look into your Bronco concerns on my end. Will you send us a message with your VIN and dealership info? I can look into things on my end.

This is my biggest concern about the Bronco. The door storage issue is a poor reason not to have window frames on this truck. IMHO!!