Bronco Nation

37's On Wildtrak With Just A 1.5" Body Lift?

Steve_In_29
Mar 31, 2026

Semper Fi

Yesterday at 8:04 pm

Early Bronco guy and thus I'm new to this independent front suspension stuff, so pardon my ignorance.

I have a 23 Wildtrak and it seems to me that with 35 (ok 34.4") tires stock that with a 1.5" body lift there should be room to clear 37s.

I understand there is a need to go with different offset wheels? Going from stock 30mm to 25...12...0 offset?

What am I missing?

Bronco will see off-road use though likely not high speed desert running nor hard core rock crawling.

Rank 0

Today at 11:39 am

#1
No message for this thread yet so I'll take a stab at this. LOL. So I have a 2024 Wildtrak (SaS is standard) approx. 1.3 inch lift I think. I personally did the Eibach H.O.S.S. 3.0 Lift and Level Springs HD kit that lifted about 2 inches. I had 300 lbs in skid plates added so I got the HD springs to keep my FOX shocks setup. Loving it by the way!!! With all the advanced research I did I found that in order to add 37s to your Wildtrak you should get wheel spacers or preferably zero offset wheels to push the tire out a little. Also JKS Max tire clearance kit is a must to prevent rubbing especially if you go crawling. Mall crawlers need not apply lol. The 1.5" lift should suffice if you also do clearance kit. I wanted to avoid the clearance kit at first but I would get rubbing at full lock. #$.02, Good luck bud.

Man I had this all typed up before your post was listed. LOLOLOL. So yes 0 offset, JKS Max tire Clearance, 37s, and off-road!!! Fun times.
Steve_In_29

You must log in or register to post here.