Front Camera

Gregg Hill

I have the Bronco Badlands Sasquatch Lux that I added a factory winch to. Does anyone offer a bracket so I can move my front camera.
I would also like to move the front sensors so that i can turn them back on. Is there a bracket/directions available to do this?
The camera would not be too much trouble, I am just not sure about the front parking sensors. Oddly enough the sensor for the adaptive cruise control was not effected.

Search on your topic. There is a ton of info about this. One I can think of is JCROffroad.

DV8 Offroad has a camera relocation kit.

I used the DV8 OffRoad camera relocation kit and ACC relocation kit with my Ford/Warn OEM winch mount. Had to drill/cut out holes for the sensors and extended them using a Pigtail I got from Rough Country that they sell with their bumper. Works great. No ACC issues and great camera visibility. You have to pay close attention to the orientation of the sensors when you re-install them or they will not work properly. Hope this helps.

Gregg Hill

I have the Bronco Badlands Sasquatch Lux that I added a factory winch to. Does anyone offer a bracket so I can move my front camera.
I would also like to move the front sensors so that i can turn them back on. Is there a bracket/directions available to do this?
The camera would not be too much trouble, I am just not sure about the front parking sensors. Oddly enough the sensor for the adaptive cruise control was not effected.

I have a 23 Badlands Sasquatch with the High package, I installed the Westin winch bumper and bull bar. I used the DV8 camera relocation bracket which locates the camera just above and forward of the fairlead as shown in skinbnz pictures. The DV8 bracket work great but I was concerned that the camera could get damaged because of it's location. I looked on 6G sponsors page and saw that JCR, Turn and Rough Country also made front camera relocation brackets. I ordered and received the Rough Country bracket ($70.00 / free shipping) which moves the camera up (under the bull bar) and some what behind the Fairlead, which I feel is more protected. I haven't swapped it out yet but will when it warms up.

bardar25

I have a 23 Badlands Sasquatch with the High package, I installed the Westin winch bumper and bull bar. I used the DV8 camera relocation bracket which locates the camera just above and forward of the fairlead as shown in skinbnz pictures. The DV8 bracket work great but I was concerned that the camera could get damaged because of it's location. I looked on 6G sponsors page and saw that JCR, Turn and Rough Country also made front camera relocation brackets. I ordered and received the Rough Country bracket ($70.00 / free shipping) which moves the camera up (under the bull bar) and some what behind the Fairlead, which I feel is more protected. I haven't swapped it out yet but will when it warms up.

Thank you, gives me a couple options. $70 not bad either.

MIGeezer

Search on your topic. There is a ton of info about this. One I can think of is JCROffroad.

thank you.