Bronco Nation

Dash cam with for manual mirror

dickiebirdventures
Feb 03, 2026

Rank I

Today at 2:50 am

Hi folks - any thoughts on how to power a dash cam for a manual mirror- can I use one of the upfitter switches? (would need to reduce the voltage). Thanks

2025 Badlands SAS

Rank IV

Today at 2:03 pm

#1
dickiebirdventures
Hi folks - any thoughts on how to power a dash cam for a manual mirror- can I use one of the upfitter switches? (would need to reduce the voltage). Thanks

2025 Badlands SAS

1) does your dash cam run on less than 12 volts????

2) If power is not run to the location you want... You will need to run power to that location.

3)You could get away with using an upfitter switch.... But why? Tie to a power lead that cycles with the retained accessory power. At least that would be my approach... (actually it was)...
Jakob1972

Gladesmen

Today at 3:16 pm

#2
Unicorn
Tie to a power lead that cycles with the retained accessory power. At least that would be my approach... (actually it was)...

That’s how I powered mine as well
BN 1100, Desert Sand Everglades. Reservation 7/30/20. ordered 1/22/21, reordered 10/15/21 dropped tow and hard top, reordered 3/9/22 changed to Everglades. production date 9/7/22 rescheduled 9/14/22 completed 9/26/22, shipped 10/7/22, arrived 10/31/22, delivered 11/03/22

You must log in or register to post here.