2 door soft top

Are you looking for an aftermarket soft top for the 2 door or a few shots of one being used?

In both cases, Bestop’s product page has you covered:
https://www.bestop.com/products/trektop-21-22-bronco/
One distinction between the Bestop soft top and the factory one is that the factory one goes all the way down. The Bestop product only opens up the top area which then leaves you to have to remove the side and rear panels (you’ll see in the pics linked above).

hope this helps (or at least gets the ball rolling toward getting you the answer you need)

Thank you! I ordered the factory one as I was not aware of the bestop products. I am having trouble finding the pics of the factory one. I am thinking maybe to cancel it but want to see it first.. My car is scheduled 1st week of January so I thing I have a little time.

Also on you tube ford has videos for soft and hard top removal and install.

yes but frustrating that they dont show the 2 door factory roof model anywhere

Alek

yes but frustrating that they dont show the 2 door factory roof model anywhere

There isn't a factory 2-door soft top. The one you can order through Ford is the Bestop linked above.

Well thats a valuable info! Thank you so much! The factory charges $2480 for it where the same option then is $1799 from bestop. I think I will cancel the factory one if thats the case. Any thoughts on this?

Alek

Well thats a valuable info! Thank you so much! The factory charges $2480 for it where the same option then is $1799 from bestop. I think I will cancel the factory one if thats the case. Any thoughts on this?

Yes! That is so correct, there is no soft top through Ford for the 2 door, everything you see on the build and price website is for accessories for the top of your Bronco and not A Soft Top.

BitterBronco

Are you looking for an aftermarket soft top for the 2 door or a few shots of one being used?

In both cases, Bestop’s product page has you covered:
https://www.bestop.com/products/trektop-21-22-bronco/
One distinction between the Bestop soft top and the factory one is that the factory one goes all the way down. The Bestop product only opens up the top area which then leaves you to have to remove the side and rear panels (you’ll see in the pics linked above).

hope this helps (or at least gets the ball rolling toward getting you the answer you need)

Ordering that next. Springs gonna come where its nice briefly and then gets cold again, so might as well be able to reapply the top quickly

I live in Miami Beach soft top all the way...

Alek

Well thats a valuable info! Thank you so much! The factory charges $2480 for it where the same option then is $1799 from bestop. I think I will cancel the factory one if thats the case. Any thoughts on this?

factory option probably includes labor costs, or they just assume someone ordering either wont do their hw or be too impatient to wanna wait for a bestop of their own

imo, mic and a bestop are basically the dual top options, just save $685 as I’m not sure what a 6 pack costs when you have a friend help you with replacing the mic and installing the soft

Alek

Thank you! I ordered the factory one as I was not aware of the bestop products. I am having trouble finding the pics of the factory one. I am thinking maybe to cancel it but want to see it first.. My car is scheduled 1st week of January so I thing I have a little time.

Also, Bestop has YouTube videos showing the removal of the hard top on 2 doors and the soft top on a 4 door, then the installation of their Bestop roof.
I’m jealous that you’re at this stage of the process!

BitterBronco

Also, Bestop has YouTube videos showing the removal of the hard top on 2 doors and the soft top on a 4 door, then the installation of their Bestop roof.
I’m jealous that you’re at this stage of the process!

Yes I saw the videos and looked in to the manual should be a straight forward process. I have to figure out where to store the hard top now as I live in a condo.. I am a day 1 reservation holder and my production date is January 3. I am glad I get the 22 model but would have liked it much better earlier..

Alek

Yes I saw the videos and looked in to the manual should be a straight forward process. I have to figure out where to store the hard top now as I live in a condo.. I am a day 1 reservation holder and my production date is January 3. I am glad I get the 22 model but would have liked it much better earlier..

Can I have your hard top? Lol I’ll take it to the MAP myself so they can finally get mine built!

oh I am planning to paint the top and customize....maybe a wrap idk. I will get good at swapping trust me lol

The BesTop requires foam seals adhered to the Bronco body on the beltline that have to be removed when installing the hard top. The seals can not be reused, so you'll have to order them from BesTop ahead of time if you plan to switch back and forth.

I saw the Bestop soft tops at Super Celebration, I thought they looked great. 1000% better look and fit than the four door soft top. Not sure who makes those.

I am still not sure how you pop it open from the back to make the space larger for loading and unloading. Most videos are for 4 door I saw only one random video for 2 door Bronco opening/lifting the back area and it confused the heck out of me

TorgSurv

The BesTop requires foam seals adhered to the Bronco body on the beltline that have to be removed when installing the hard top. The seals can not be reused, so you'll have to order them from BesTop ahead of time if you plan to switch back and forth.

Is this like a 3M adhesive that you put on the body for the seal?

Alek

I am still not sure how you pop it open from the back to make the space larger for loading and unloading. Most videos are for 4 door I saw only one random video for 2 door Bronco opening/lifting the back area and it confused the heck out of me

It doesn't. You'd have to remove the rear window. The Bestop has less functionality than the factory 4-door top.