Top Removal Advice

absmith0

Rank III

Advocate II

Jul 16, 2020
7
19
846
Rhea County, Tennessee, United States
First Name
Adam
Last Name
Smith
Member #

0598

My son and I have a 1995 Bronco. It is sitting on 35s with a 6inch lift. We also purchased a cherry picker from the auto part store to lift the top off. Unfortunately, it doesn’t extend far enough. Any advice on a bracket to put on it that would lift from inside the top? Thanks.
 

Raser13

Rank 0

Advocate II

May 31, 2022
7
14
68
Champaign, IL, USA
First Name
Roger
Last Name
Phillips
If you have a garage there are some that attach to the ceiling and lift UT from all four corners. Most are marketed at jeep owners. But some work for ours as well. You just have to get one that has all four corner cables being the same length.

But you could also easily make one with some stout rope it cable and a pulley.
 

Jakob1972

Rank VI

Champion I

Aug 17, 2020
3,066
6,856
2,964
Guadalupe River State Park TX, USA
First Name
Steven
Last Name
Jakob
Member #

1100

You might could build yourself a Gantry Crane. Think of a tall wooden saw horse with a block and tackle to lift the top. I am assuming you can not did the lifted Bronco in a garage.