Bronco Nation

PROJECT X - RTR Fun Runner

Red_Devil
Apr 25, 2022

Rank III

Apr 25, 2022

Hey everyone!
Really excited to share our latest build!

Introducing our new PROJECT X company cruiser! This 2021 Ford Bronco 4-door started with the full RTR Vehicles treatment, and was then outfitted with the entire suite of Fun-Haver Off-Road parts including:

Fun-Haver 5"+ Wide Body Fenders
Fun-Haver 3"+ Mid Travel Suspension package w/ FOX 2.5 Elite Performance front and rear Coil Overs
RTR Vehicles Front bumper tubular end caps
RTR Vehicles Rear Bumper with Tire Carrier and Jerry can mount
RTR Vehicles Rock Sliders
RTR Vehicles Adjustable Tailgate stop
RTR Vehicles Offroad Jack Mount
RTR Vehicles Roof light bar mount and harness with our FF.70 LED lights
RTR Vehicles Front bumper driving light brackets with HP.70 LED lights
RTR Vehicles Bead lock wheels w/ Nitto Tire USA 37x12.50x17 Trail Grapplers
Livery collaboration with Fun-Haver Off-Road and PROJECT X


We had the chance to put this amazing new Bronco to the test out in Moab, UT with Vaughn Gittin Jr. and Loren Healy, and we can't wait to take it to all our off-road events this year to show you just how incredibly capable this rig is!

278744324_540513214099002_8157918372662811974_n.jpeg
278731599_540513304098993_9082710673219295804_n.jpeg
JARED CHAVEZ | DIRECTOR OF BRAND DEVELOPMENT
PROJECT X OFFROAD
Se7en7Se7en, Xpathf1nderX
Last edited by a moderator: Apr 25, 2022

Rank V

Apr 25, 2022

#1
Looking good. Those are the fenders Ford should have used on the Raptor Bronco.
2021Bronco☆2.3☆BL☆7MT☆4D☆A51☆SoftT☆ARRIVED 9/9/21☆SOLD 1/21/23☆NT Supports▪Consults▪Supply's Car Dealers, Vehicle Distributors, and Retail Customers Since 1992
RWhite, Bschurr
Moderator Staff member

Administrator

Apr 25, 2022

#2
Thanks for posting, Jared. Incredible build!
2021 Oxford White 2-door non-Sas Mid package 2.7L/10-speed Badlands with MIC top
2021 Carbonized Gray 2-door Sas High package 2.7L/10-speed Badlands with MIC top
Keeping the Jeeps: stock '89 XJ and 3.5" lifted '00 XJ on 31s

Rank VI

Apr 25, 2022

#3
Dig the rear bumper, fuel carrier, rails, and suspension! Sweet!

would love to see another winch mount!
2021 badlands, 2.3, MT, rapid red, soft top
Bschurr

Rank I

Apr 28, 2022

#4
Are those front light mounts available (or going to be) anyplace? I couldn't find anything like them on the RTR web site. They look like four separate pieces, which I assume means holes the middle yellow lights were drilled into the bumper, while the outer lights might leverage the existing bolt patterns. I have the 2022 Capable Bumper and am looking to mount four lights exactly like you've done here (except they are 3.5" diameter). Any plans for that bumper yet?

Rank III

Apr 28, 2022

#5
Badland-Mansquatch-ATX
Are those front light mounts available (or going to be) anyplace? I couldn't find anything like them on the RTR web site. They look like four separate pieces, which I assume means holes the middle yellow lights were drilled into the bumper, while the outer lights might leverage the existing bolt patterns. I have the 2022 Capable Bumper and am looking to mount four lights exactly like you've done here (except they are 3.5" diameter). Any plans for that bumper yet?

These mounts will be available soon along with the accompanied wiring harness through RTR Vehicles, however they are specifically made for our PROJECT X HP.70 lights.

The ones on the outside bolt into the existing holes and a template will be provided if you want to mount them in the middle. The bumper is stock utilizing the RTR Tubular Front Corners.

278656525_538732484583642_1893405846272813319_n.jpg
JARED CHAVEZ | DIRECTOR OF BRAND DEVELOPMENT
PROJECT X OFFROAD
Bschurr

Rank I

Apr 28, 2022

#6
Thank you for the quick reply! Once again, realizing my mistake by not getting the Modular Bumper. I'll keep waiting for a similar option I can use on the Capable.

GASQUATCH

May 26, 2022

#7
Red_Devil
Hey everyone!
Really excited to share our latest build!

Introducing our new PROJECT X company cruiser! This 2021 Ford Bronco 4-door started with the full RTR Vehicles treatment, and was then outfitted with the entire suite of Fun-Haver Off-Road parts including:

Fun-Haver 5"+ Wide Body Fenders
Fun-Haver 3"+ Mid Travel Suspension package w/ FOX 2.5 Elite Performance front and rear Coil Overs
RTR Vehicles Front bumper tubular end caps
RTR Vehicles Rear Bumper with Tire Carrier and Jerry can mount
RTR Vehicles Rock Sliders
RTR Vehicles Adjustable Tailgate stop
RTR Vehicles Offroad Jack Mount
RTR Vehicles Roof light bar mount and harness with our FF.70 LED lights
RTR Vehicles Front bumper driving light brackets with HP.70 LED lights
RTR Vehicles Bead lock wheels w/ Nitto Tire USA 37x12.50x17 Trail Grapplers
Livery collaboration with Fun-Haver Off-Road and PROJECT X


We had the chance to put this amazing new Bronco to the test out in Moab, UT with Vaughn Gittin Jr. and Loren Healy, and we can't wait to take it to all our off-road events this year to show you just how incredibly capable this rig is!

View attachment 34580
View attachment 34577
Do you have any concerns with that spare tire size, highlift, and gas gas on the tailgate hinge?
2022 Badlands / Sasquatch / 2.7 / Auto / 2DR / MIC / Bestop Trektop / LUX / 12000# Badland winch / in Hot Pepper Red

You must log in or register to post here.