Heat Riser Choke

Is this what you are looking for?

Is your choke opening fully when warmed up? If so, it shouldn’t affect mixture.

If you mean you just don't have a place to connect the tube, You need a kit like shoronco listed above. You use two hose clamps to clamp that short tube with tabs to one of your header tubes, then you can attach the flexible metallic heat riser tube between it and the fitting on they snorkel of your air cleaner assembly.

Or are you referring to the small insulated metal tube going between the stock manifold and the thermal choke?

o0OP mised it, thought it was May 2021
(BN is kinda dead, no? May B I'm on the wrong forum 4 'action')...

Anyway (4 posterity !)...
"...on the snorkel..."
I assume U do not have a stock air cleaner housing?
"A pic is wortha..."
show or tell us what U have.

The Real Deal is NAME the problem (w/o the solution U have come up with imbedded in it) U have and we can help U w/a work-a-round solution...

(but I wont wait for his return)
8^ 0

what this I hear?
theres gunna B a new bronk?
I hope they put the Raptor underneath. 2 dor, 90, 95 inch WB...