GVWR Q&A and Details for 2021 Ford Bronco *Updated*

Stereo

Rank V

Don't delete

Jul 13, 2020
232
563
2,491
Fair Oaks, CA 95628, USA
First Name
Jeremy
Last Name
Stefanek
Member #

0390

@David is there any way to find out if First Edition 4 Dr customers can have towing available as a Dealer Installed Option? Understanding if the wiring is run at the factory, etc. allowing for us to add it at the dealer will help determine if this is a deal breaker.

Edit: I promise this will be my last request ;)
 
Last edited:
  • Like
Reactions: BuzzyBud

CCDetroit

Rank IV

Supporter I

Dec 17, 2020
102
222
1,192
Detroit, MI, USA
First Name
Carly
Last Name
Cummings
Member #

100003

It is just one slap in the face after another for FE res holders!
CAN WE ASK FORD TO DRILL THE HOLES, DO THE WIRING IN FACTORY? IT WON'T AFFECT THE WEIGHT, BUT WOULD BE SO HELPFUL TO US AND SAVE US MONEY!!

THAT WAY WE DONT HAVE TO HAVE THE DEALER OR OTHER PARTY DRILL HOLES, SPLICE WIRES. ALL WE HAVE TO DO IS ADD THE HITCH AND HOOKUP.
GIVE US SOMETHING!!
 

David

Administrator
Staff member
Moderator
Super Moderator

Promoter II

Mar 19, 2020
1,755
9,811
3,501
Southgate, MI, USA
First Name
David
Last Name
Liebmann
Member #

144

@David is there any way to find out if First Edition 4 Dr customers can have towing available as a Dealer Installed Option? Understanding if the wiring is run at the factory, etc. allowing for us to add it at the dealer will help determine if this is a deal breaker.

Edit: I promise this will be my last request ;)
The tow hitch is available on the accessories list. Wiring for the two hitch from the factory is a good question to submit on the Q&A thread.
 
  • Like
Reactions: Stereo

Deano Bronc

Rank VI

Don't delete

May 20, 2020
2,634
6,071
3,501
Winona Lake, IN, USA
First Name
Dean
Last Name
Smeltzer
Member #

0215

It is just one slap in the face after another for FE res holders!
CAN WE ASK FORD TO DRILL THE HOLES, DO THE WIRING IN FACTORY? IT WON'T AFFECT THE WEIGHT, BUT WOULD BE SO HELPFUL TO US AND SAVE US MONEY!!

THAT WAY WE DONT HAVE TO HAVE THE DEALER OR OTHER PARTY DRILL HOLES, SPLICE WIRES. ALL WE HAVE TO DO IS ADD THE HITCH AND HOOKUP.
GIVE US SOMETHING!!
The plug, which I'm certain will include the wires, is on the accessory list. It will just be a plug and play type installation. I'm sure there will be no splicing of wires or drilling of holes.
It will be an easy installation.
 
Last edited:

CCDetroit

Rank IV

Supporter I

Dec 17, 2020
102
222
1,192
Detroit, MI, USA
First Name
Carly
Last Name
Cummings
Member #

100003

The plug, which I'm certain will include the wires, are on the accessory list. It will just be a plug and play type installation. I'm sure there will be no splicing of wires or drilling of holes.
It will be an easy installation.
I hope so. Just expecting the worst, hoping for the best.
 
  • Like
Reactions: Deano Bronc

OvrLnd99

Rank 0

Advocate II

Jan 10, 2021
9
6
68
Lubbock, TX, USA
First Name
Joshua
Last Name
Mayeux
Member #

2334

The article and information about weights is missing the 4 door Wildtrak. Do we know the Base Curb weight, Max Payload, and GVWR for the 4 door Wildtrak?
 

Eldonfredo

Rank 0

Advocate I

Jan 16, 2021
2
1
30
USA
First Name
Alfredo
Last Name
Alvarado
Electronic Shift on the Fly and Electro-Mechanical Transfer Case
Thank you! Pardon my ignorance, how does one option the vehicle to get the EMTC weight? ESOF, now that you have pointed it out of course, obviously refers to one of the drive options by the same name. Does the other drive option—Advanced 4x4–then mean one would use the EMTC GCWR in the chart? if not, how do I spec the vehicle to get to the higher GCWR? Thanks again.
 

David

Administrator
Staff member
Moderator
Super Moderator

Promoter II

Mar 19, 2020
1,755
9,811
3,501
Southgate, MI, USA
First Name
David
Last Name
Liebmann
Member #

144

Thank you! Pardon my ignorance, how does one option the vehicle to get the EMTC weight? ESOF, now that you have pointed it out of course, obviously refers to one of the drive options by the same name. Does the other drive option—Advanced 4x4–then mean one would use the EMTC GCWR in the chart? if not, how do I spec the vehicle to get to the higher GCWR? Thanks again.
Hey, Eldonfredo! I believe you option EMTC it by having the Advanced 4x4 option.
 

Deepshag

Rank VI

Don't delete

Jul 13, 2020
640
1,653
2,964
Campbell, CA
First Name
Shag
Last Name
Hughes
Member #

3074

[46559] Platinum 4x4 SuperCrew Cab Styleside 6.5 ft. box 157 in. WB5014 lbs.

The FE's curbside weight is more than a Platinum Supercrew 6.5 foot box F150?
 
  • Wow
Reactions: KennyMac

David

Administrator
Staff member
Moderator
Super Moderator

Promoter II

Mar 19, 2020
1,755
9,811
3,501
Southgate, MI, USA
First Name
David
Last Name
Liebmann
Member #

144

The article and information about weights is missing the 4 door Wildtrak. Do we know the Base Curb weight, Max Payload, and GVWR for the 4 door Wildtrak?
We have added 4-Door Wildtrack to the document.