MIC Hard Top Specs

Chaos

Jul 16, 2021

Does anyone know of or if the specs for the hard tops are out there somewhere. Actually line drawings/design drawings, maybe 3 CAD file for the molds?
I can build a better carbon fiber composite top, but Ideally I need an example top or at the very least a vehicle to go off of. Since both of these seem like difficult if not impossible requests, I am thinking that maybe I can get started with drawings to start mocking up protos.

95 Eddie 5.8 Windsor 2021? nope, 2022?, wait 2022.5 HOSS3.0 equipped WildTrak/LUX/Leather/MIC. 7/14 RES

Last edited by a moderator: Jul 16, 2021

Sort by date

Reaction Score

Jul 16, 2021

Good luck since they are about as hard to find as the FE build emails

WT HOSS 4dr 2.7 MIC Lux Tow
7/16/20 Res -- 1/22/21, 10/8/21 Order -- 3/24/22 VIN -- 5/9/22, 5/23/22, 5/16/22, 6/6/22, 6/17/22 Build 7/15/22 Delivered
Storm Factor - Never Stop Chasing! BrawnCo.Club 501c3 Pending

KennyMac, Cheeselog

Jul 16, 2021

ResidualGenius
Good luck since they are about as hard to find as the FE build emails

Definitely a long shot, but potentially a better solution for me. Not planing on making them for others, just a one off, something truly custom, not a bunch of cheap bolt on accessories. At some point a bunch of reject tops will be in a landfill, stack up out back, or given how bad people drive, there will soon be some salvage broncos.
I haven't done a patent search, but I would think there is a reasonable chance there are some drawings out there in the public domain.

95 Eddie 5.8 Windsor 2021? nope, 2022?, wait 2022.5 HOSS3.0 equipped WildTrak/LUX/Leather/MIC. 7/14 RES

ResidualGenius

You must log in or register to post here.