Bronco Nation

Bronco Flag Mount from Jeff's Bronco Graveyard

Burtoni Motors
Feb 25, 2022

Rank V

Feb 25, 2022

I picked this up at Jeff's Bronco Graveyard (Link) and it works well and looks nice. My only complaint was the two bolts that came in the kit were not correct, they came with Torx and not the Torx Plus that were used originally. If you've got both (which I did) they will work together.


IMG_6156.jpeg

IMG_6150.jpeg
2022 Big Bend in Race Red
Mal, ResidualGenius
Last edited by a moderator: Feb 25, 2022

OBIE

Feb 25, 2022

#1
Burtoni Motors
I picked this up at Jeff's Bronco Graveyard (Link) and it works well and looks nice. My only complaint was the two bolts that came in the kit were not correct, they came with Torx and not the Torx Plus that were used originally. If you've got both (which I did) they will work together.


View attachment 29669

View attachment 29670
For the Torx, I would suggest applying thread lock. And for the pole fasteners, I would drill a hole at the bottom of the threads, and use a lock pin, such that the nut can't back off.
Burtoni Motors

Rank V

Feb 25, 2022

#2
Mikey Smith
For the Torx, I would suggest applying thread lock. And for the pole fasteners, I would drill a hole at the bottom of the threads, and use a lock pin, such that the nut can't back off.

I added some thread lock, on the Torx but did not think about that lock pin. I'll probably do that today, thank you for the advice. Do you have an example of what that would look like? @Mikey Smith
2022 Big Bend in Race Red
CBWAR1

OBIE

Feb 25, 2022

#3
Burtoni Motors
I added some thread lock, on the Torx but did not think about that lock pin. I'll probably do that today, thank you for the advice. Do you have an example of what that would look like? @Mikey Smith
You could use a cotter pin temporarily, but what I'm referring to is a small version of the clip that you would insert into a trailer hitch receiver's pin. 1645809248931.png
Moderator

Standing Grumpy Face

Feb 25, 2022

#4
Those are pretty cool. Now you can roll diplomat style. :cool:

1645809545265.png
CBWAR1, IL21Bronco

Rank V

Feb 25, 2022

#5
That lock washer won't do anything either. Could replace it with a flat washer as that's about all it does once compressed. I'm surprised that Nord-lock washers have not made it into this market yet. They are clearly superior and shouldn't add that much to the cost of the product.

2D Base Mansquatch: Ord 11-24-2021; VIN 3-16-2022; Schd 5/9/22; Sticker 5/4/22; Modules 5/10/22;Built 5/11/22;Shipt 5/12/22;Delv 5/24/22

OBIE

Feb 25, 2022

#6
Here is another idea, would require drilling-

https://www.extremeterrain.com/bron...rod-quick-release-flag-mount-black-3-136.html

Rank V

Feb 25, 2022

#7
Mikey Smith
Here is another idea, would require drilling-

https://www.extremeterrain.com/bron...rod-quick-release-flag-mount-black-3-136.html

That still leaves the bolt the same though?
2022 Big Bend in Race Red

Rank IV

Aug 23, 2022

#8
Looking for a mount for the rear, near the spare tire. Any suggestions?

Rank VI

Aug 23, 2022

#9
WVBullDawg
Looking for a mount for the rear, near the spare tire. Any suggestions?

Never used it but ive seen others run something like this that connects to tailgate
MY21 2dr Black Diamond 7MT Velocity Blue!
WVBullDawg

You must log in or register to post here.