Script Emblem Size

I wound up getting a couple versions. They’re 10” to 10 3/4” long.

Bonnie6G

I wound up getting a couple versions. They’re 10” to 10 3/4” long.

View attachment 29944

Thank you so much!

Are you happy with the Etsy version? Thank you

Jesusfreak

Are you happy with the Etsy version? Thank you

The Etsy ones seem to have a two tone effect - chrome bottom and clear body, where the original one that was created by bronco depot is all chrome in color, which i prefer. They both are sturdy in the hand, but I can’t speak to longevity once installed for either.

I would like to know which one is the best. I want black, but some of the ones I have seen on EBay that are 3d printed look like they are not smooth based on the photos posted. I also want one that uses automotive tape. Some of the old ones have the post. I have even thought of ordering those and removing the post, painting black and using 3M tape. Thoughts?

I put the 3D ones on mine

ABShirey

I am wanting to get the Bronco Script Emblem, and found one on Etsy. It comes in two different sizes. I don’t have my Bronco yet to measure, and wanted to know those who already have the script what size is yours? I couldn’t find out online the size of the original.

I believe I found online at some point that the original ones are around 9” long. I’ll see if I can find it. Another option is to buy original ones, cut off the pins that they have that go through the fenders of old broncos, and use 3M to stick it to your fender.

NDBronco22

I put the 3D ones on mine

Link?

Jesusfreak

NDBronco22

I put the 3D ones on mine

Link?

I ended up getting these ones off of Etsy. They came in last week. I really like them, and they have great reviews. She even sent a free Bronco pin. Now just need my Bronco to put them on.
www.etsy.com/listing/1146959002

Etsy is about your only option. Ford has shut everyone else down as they were not licensed products. Get them while you can, as these won't be around long either as they aren't licensed products either.

Choose your flavor:

https://www.wildhorses4x4.com/category/earlybroncoemblems
Cut the studs and use double sided tape if you don't want to drill.

badgeslide.com just ordered some and will let you know what they look like when I get them. Will post pictures if I ever get a Bronco ;-)

ABShirey

I ended up getting these ones off of Etsy. They came in last week. I really like them, and they have great reviews. She even sent a free Bronco pin. Now just need my Bronco to put them on.
www.etsy.com/listing/1146959002

Did you get the longer ones?

tommygraham

I would like to know which one is the best. I want black, but some of the ones I have seen on EBay that are 3d printed look like they are not smooth based on the photos posted. I also want one that uses automotive tape. Some of the old ones have the post. I have even thought of ordering those and removing the post, painting black and using 3M tape. Thoughts?

3m makes a double sided tape you press your emblem on and when you peel it off all that comes with is the tape stuck to the emblem. Then you don't have to try and cut it out. Worked great.

Jesusfreak

ABShirey

I ended up getting these ones off of Etsy. They came in last week. I really like them, and they have great reviews. She even sent a free Bronco pin. Now just need my Bronco to put them on.
www.etsy.com/listing/1146959002

Did you get the longer ones?

Yes, since they are closer to original size.

ABShirey

Yes, since they are closer to original size.

Just ordered a set.

arricksports

badgeslide.com just ordered some and will let you know what they look like when I get them. Will post pictures if I ever get a Bronco ;-)

Until ford sends them a cease and desist!

You all do realize that LMC Truck sells all kinds of real Bronco fender badges for most generations of Broncos and is not in jeopardy of receiving a "cease and desist" letter from Ford. Plus the majority of the items they sell are OEM quality/finishes/material--pricing is in line with what resellers that knock off the originals are selling for.

frdfan

You all do realize that LMC Truck sells all kinds of real Bronco fender badges for most generations of Broncos and is not in jeopardy of receiving a "cease and desist" letter from Ford. Plus the majority of the items they sell are OEM quality/finishes/material--pricing is in line with what resellers that knock off the originals are selling for.

In support of what your saying.
CJ pony parts also sells Ford approved Script as well.
I went with Black Chrome and drilled the holes for the barrel nuts as just a personal preference I don’t care for the tape option.
I support all of you who do.