Roof rack

The rack attaches to the hard top.

Nope has to have the rear hardtop on since the attachment points are on the side of the rear top

Won’t that be loud, is the rear 3 pieces or 1?

Anybody know of any aftermarket companies currently producing roof racks?

No, it's my understanding they haven't gotten a Bronco to test fit. I offered mine, thinking it would be here sooner than later, to a local company so I may drop it off for a week or two to a couple places in the hopes they can get some cool stuff designed for the aftermarket.

ResidualGenius

Nope has to have the rear hardtop on since the attachment points are on the side of the rear top

Well technically you can. as he asked if he can have a rack also with a bimini top which is possible as long as he leaves the rear shell on because the Bimini top attaches to the rear shell.

Yes... Badlands comes without

Had a Gobi on my 4runner that I liked or perhaps a Prinsu

GOBI the shiznit.

FWIW.. you will have a ton of options about a year after the first trucks hit the market.. many suppliers have to buy or borrow trucks to pattern their gear on.

front runner will have a rack, just like rhino rack and some others.

DRWright

Well technically you can. as he asked if he can have a rack also with a bimini top which is possible as long as he leaves the rear shell on because the Bimini top attaches to the rear shell.

The bimini does not attach to the rear shell; it attaches to the roll bar. But you can keep the bimini on under the top

Buckin'

The bimini does not attach to the rear shell; it attaches to the roll bar. But you can keep the bimini on under the top

Agreed.

Matt2020

Won’t that be loud, is the rear 3 pieces or 1?

The MIC top's rear is a 1-piece shell, as in it's made of multiple parts but comes off as one piece. There are three other parts of the roof on a 4-door that come off separately: two panels over the front seats, and one panel over the back seats. With the roof rails on, you can remove the front two panels, but not the mid panel over the rear seats. But you could take off the front panels and mid panel, and then install the roof rails.

The (as yet unavailable) modular top will have a 1-piece shell but with two removable rear windows.

Buckin'

The MIC top is a 1-piece shell, as in it's made of multiple parts but comes off as one piece. The (as yet unavailable) modular top will have a 1-piece shell but with two removable rear windows.

MIC is not one piece. A 2Dr has two removable panels above the front seats. The back, clamshell section is one piece. The 4Dr has two panels above front seat, one panel over rear seats and the back is, again, the one piece clamshell section

TK1215

MIC is not one piece. A 2Dr has two removable panels above the front seats. The back, clamshell section is one piece. The 4Dr has two panels above front seat, one panel over rear seats and the back is, again, the one piece clamshell section

Read my edit lol. I was referring only to the rear shell but decided to clarify. And kept expanding.

Buckin'

Read my edit lol. I was referring only to the rear shell but decided to clarify. And kept expanding.

Haaaaa i don’t know how many times I have done that. Usually I type gibberish and catch it later!