Bronco Nation

Oil pans

Bronco V-8
Nov 01, 2020

Mud,Sweat and Gears

Nov 01, 2020

Thought I'd share this. I was doing an engine swap with a 289 into a car that didn't have a V-8 option. The 289-302 car engines use a front sump oil pan I needed a rear sump. A little reserch I found out Broncos 66-77 use a rear sump pan. Swap pan,pick up, stick tube and stick and your done. If you get a Bronco with a bad engine make sure you keep these parts if putting new engine as it might not have the proper pan etc.
tasker, Deano Bronc
Last edited by a moderator: Nov 01, 2020

Rank VI

Nov 01, 2020

#1
Bronco5.0
Thought I'd share this. I was doing an engine swap with a 289 into a car that didn't have a V-8 option. The 289-302 car engines use a front sump oil pan I needed a rear sump. A little reserch I found out Broncos 66-77 use a rear sump pan. Swap pan,pick up, stick tube and stick and your done. If you get a Bronco with a bad engine make sure you keep these parts if putting new engine as it might not have the proper pan etc.
Cool !
So many of us go about reinventing the wheel....

Sharing on the forum makes all of us smarter, ....if not wiser. ;)
Jakob1972

You must log in or register to post here.