Search results

  1. brnc_o_vrlndr

    URSA Minor

    The last time I communicated with them, they said they plan on having the prototype at the Overland Expo PNW. They would start showing/building them after that. I’m holding onto my reservation for now, but also waiting for the Gobi rack (August??).
  2. brnc_o_vrlndr

    CarPlay

    Interesting. I have not run into that myself. Any other devices to try?
  3. brnc_o_vrlndr

    CarPlay

    Have you tried to remove your phone from the list of available phones? Basically going through the whole process of connecting the phone again. There should be a trash can icon next to your phone in the phone listing section of Sync 4.
  4. brnc_o_vrlndr

    Phone charge pad

    I installed this one from Amazon. I use it with my iPhone 11 Pro Max and it works great… until you need to charge and use any apps related to gps in CarPlay. It seems it is not powerful enough to charge and run gps, so the location in the app tends to freeze up. I will be looking for other...
  5. brnc_o_vrlndr

    US Southwest Bronco Nation at Overland Expo West Sedona Experience - Sunday

    Sedona is one of my favorite places! That is going to be an epic trip! Wish I could join!
  6. brnc_o_vrlndr

    What did you do to your Bronco today?

    Nice! It was December for me, but I hope you’ve had just as much fun per mile as I have. Best vehicle I’ve owned, by far.
  7. brnc_o_vrlndr

    What did you do to your Bronco today?

    While I didn’t get to perform any mods yesterday, I did reach a milestone on the odometer. I certainly didn’t think I would rack up so many miles on this thing so soon, but it’s too much fun to let it stay in the garage while I drive the beater. Lol. The trip to Moab also bumped the miles pretty...
  8. brnc_o_vrlndr

    To remove tow or not to remove tow, that is the question.

    Thank you. Definitely a project that took me down many rabbit holes. Lol.
  9. brnc_o_vrlndr

    To remove tow or not to remove tow, that is the question.

    I dropped mine, and the hard top, and was able to get the first delivery at a dealer with only two allocations (I was #5 in line). Since then, I purchased and installed all of the factory components (had to add some custom wiring) for the towing package (hitch, trailer module, vehicle side...
  10. brnc_o_vrlndr

    Cargo area security drawer

    No, it does not. Though I have not tried it myself, I can't see any way they would still fit. It's a good 8 inches (at least) taller. That, and the top of the drawer system would not support the weight of all of the doors.
  11. brnc_o_vrlndr

    Remote windows closure

    There is a way, but it requires some work programming with Forscan. There are some forum threads out there on how to do that.
  12. brnc_o_vrlndr

    20% off

    I went with the sasquatch fender flares. I installed some 1.5" wheel spacers (still on the fence about that one) and wanted to cover the tire a little better to avoid rock chips and keep the tires from hitting the fender while flexing. Can't bring myself to buy aftermarket wheels with...
  13. brnc_o_vrlndr

    Trail Sight Accessory Mounts!

    Thanks for the recommendation! I have one on order for my GMRS antenna. I like the idea of having it up there instead of mounted to the edge of the hood.
  14. brnc_o_vrlndr

    Cargo area security drawer

    You used the factory bolts for the box? Did your kit come with the stand-off bolts? There were four of those in my kit that keeps the whole box lifted above the cargo floor.
  15. brnc_o_vrlndr

    Winch Mounting?

    I just installed the JCR Offroad winch plate today and have a few things to do to finish. I have the Badland Apex 12,000 lb winch to put on there. For the price, I think it is a great place to start. Can always come back and install a different winch in its place. Can't wait to try it out!
  16. brnc_o_vrlndr

    Cargo area security drawer

    Every one of my bolts stop turning, then broke the nuts free that were mounted in the enclosure. I used a pair of vice grips to hold the nuts while I removed each bolt, popped the nut out of there with the vice grips, then installed the correct nut and washer. I have not determined if there is...
  17. brnc_o_vrlndr

    Modular Bumper - where is the list of winch brackets for adaptability

    They also have a camera relocation bracket that I am also going to try out. It seems a little exposed out there in front, but we will see.
  18. brnc_o_vrlndr

    Modular Bumper - where is the list of winch brackets for adaptability

    As far as winch plates for the OEM Modular bumper go, I should be receiving this one soon from JCR Offroad. I also wanted to utilize the modularity of the stock bumper. Just picked up the winch on sale tonight in preparation. I will share some pics once it is installed. JcrOffroad: Bronco...